LED fluorescent lamp Specification:
TRANSPARENT LED T8 TUBE LIGHT | |||||||||
Length | MODEL | Watts | Led q'ty (SMD 3014) | Color Temp. | Lens Cover | Lum.(lm) | led brand | CERT. | |
600mm/2FT | MODEL: SW-T806-11100 | 11w | 100pcs | 3000-6500K | transparent | 1050 | EPISTAR | CE/ROHS | |
1200mm/4FT | MODEL: SW-T812-22200 | 22w | 200cs | 3000-6500K | transparent | 2000 | EPISTAR | CE/ROHS | |
1500mm/5FT | MODEL: SW-T815-24260 | 24w | 260pcs | 3000-6500K | transparent | 2300 | EPISTAR | CE/ROHS | |
1800mm/6FT | MODEL: SW-T818-30486 | 30w | 486cs | 3000-6500K | transparent | 2800 | EPISTAR | CE/ROHS | |
2400mm/8FT | MODEL: SW-T824-40648 | 40w | 648pcs | 3000-6500K | transparent | 3800 | EPISTAR | CE/ROHS | |
FROST LED T8 TUBE LIGHT | |||||||||
Length | MODEL | Watts | Led q'ty (SMD 3014) | Color Temp. | Lens Cover | Lum.(lm) | led brand | CERT. | |
600mm/2FT | MODEL: SW-T806-FR11100 | 11w | 100pcs | 3000-6500K | frosted | 900 | EPISTAR | CE/ROHS | |
1200mm/4FT | MODEL: SW-T812-FR22200 | 22w | 200cs | 3000-6500K | frosted | 1800 | EPISTAR | CE/ROHS | |
1500mm/5FT | MODEL: SW-T815-FR24260 | 24w | 260pcs | 3000-6500K | frosted | 2050 | EPISTAR | CE/ROHS | |
1800mm/6FT | MODEL: SW-T818-FR30486 | 30w | 486cs | 3000-6500K | frosted | 2500 | EPISTAR | CE/ROHS | |
2400mm/8FT | MODEL: SW-T824-FR40648 | 40w | 648pcs | 3000-6500K | frosted | 3400 | EPISTAR | CE/ROHS | |
NEW ECO FROST LED T5 TUBE LIGHT | |||||||||
Length | MODEL | Watts | Led q'ty (SMD 3014) | Color Temp. | Lens Cover | Lum.(lm) | led brand | CERT. | |
300mm | MODEL: SW-DGT5-3 | 3W | 30pcs | 3000-6500K | frosted | 255lm | EPISTAR | CE/ROHS | |
600mm | MODEL: SW-DGT5-6 | 6W | 60pcs | 3000-6500K | frosted | 510lm | EPISTAR | CE/ROHS | |
1000mm | MODEL: SW-DGT5-10 | 10W | 100pcs | 3000-6500K | frosted | 855lm | EPISTAR | CE/ROHS | |
1200mm | MODEL: SW-DGT5-12 | 12W | 120pcs | 3000-6500K | frosted | 1000lm | EPISTAR | CE/ROHS | |
Features:
1) Working Voltage: 90-264V
2) Light output: max output:3000lm
3) Ambient Temperature: -40 ~ 60 degrees Celsius
4) Power Consumption:max 40W
5) Can be directly placed in conventional T8 or T10 fluorescent brackets, remove ballast
and starter before replacement.
6) Color temperature: 5500K~6000K, 4000K~4500K, 2800K~3300K
7) High performance SMD led:low light degradation,up to 75% lumen maintenance after 35.000 hours operating
8) Zener Diode applied to avoid full set of leds defect
9) Special artwork:Anodize aluminum back hoursing
10) Unique thermal management:Aluminum back casing dissipate the inside heat efficiently
11) High power factor:0.95
LED Replacement Tubes Lights Production Process
LED Replacement Tubes Lights Production Process
Applications:
1.use( living room, bedroom, kitchen, washroom )
2. School, University, Hospital, Hote
3. Conference, Meeting room, Show room, Showcase
4. Commercial Complexes
5. Factories, Plants, Warehouses, Offices
6. Super-market, Department store
LED T8 T5 T10 Commercial Lighting Packing Detail:
48 hours Aging Test
Method A
Method B
LED T8 T5 T10 Commercial Lighting Packing Detail:
48 hours Aging Test
LED fluorescent office lighting Installations Introduction:
Precaution: Switch off power before doing any works.
Method A
If lighting fixture's wire connection is inductor ballast, installation as bellow:
Step 1. Remove the traditional fluorescent tube from the lighting fixture.
Step 2. Take out the inductor ballast from the lighting fixture.
Step 3. After take out the ballast, there will have two wires. One wire connects to right side and another wire connects
to left side.
Step 4. Install Torshare's Led tube light into lighting fixture. Precaution: Switch off power before doing any works
Method B
If lighting fixture's wire connection is Electronic ballast, installation as bellow.
Step 1. Remove the traditional fluorescent tube from the lighting fixture.
Step 2. Take out the starter and electronic ballast from the lighting fixture.
Step 3. After take out the ballast, there will have two wires. One wire connects to right side and another wire connect
to left side.
Step 4. Install Torshare Led tube light into lighting fixture.
What we can do for you:
1.Your inquiry related to our products or price will be replied within 24 hours.
2.Well-trained and experienced staff to answer all your enquiries in fluent English.
3.OEM&ODM, and your costumed lighting we can help you to design and put into produce.
4.Distributorship are offered for your unique design and some our current models.
5.Protecting your selling areas, idea of design and all your private information.
Quality assurance explains:
warranty:3years( The first two years, happen to quality problems, by the new product replace the
old product. )
Detailed treatment methods, according to quality agreement to deal with.
comment: SIWIN will be made of the best quality to thank you for your support.
We will serve you wholeheartedly, welcome to contact with us.