If your production requires frequent and quick color changes?
Then we would recommend the COLO-800V, which is designed to use the powder manufacturer's original carton.
Powder spray system that
offers production-proven
technology and performance
at a surprisingly affordable
price.
The new manual spray
system combines production-proven powder spray
gun and control technology and performance with
a rugged, two-wheel dolly and electric vibratory
box feeder to provide an exceptionally affordable
and versatile powder coating package
Simple, Operator-friendly Controls for
Ease of Use with Maximum Results
control unit
full set system
spare parts
powder spray gun
Configuration:
1pcs optistar control unit power supply cable
- 1pcs air filter
- A air pressure regulator
- 1pcs suction tube
- 1pcs plug-in injector
- 1pcs optiselect manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
Structure:
Technical data:
Electrical data
Mains input voltage: 220V/110V
Operating frequency: 50Hz /60Hz
Powder: 50W
Output voltage (to the gun): 0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type: IP54
Approvals: CE Certification
Pneumatical data
Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. Water vapor content of the compressed
Air 1.3 G/m 3;
Max. Oil vapor content of the compressed air 0.1 mg/m3;
Dimensions
Carton size: 120x79x73cm G. W: 55kg.
Theprocess of the coating is like this :thepowder is fluidized in thepowder hopper. The injectors transport thepowder through the hoses tothe guns . The guns spray a powder/airmixture onto the workpieces.
Powdercoating is a type of coating that is applied as afree-flowing, drypowder. The main difference between a conventionalliquid paint and apowder coating is that the powder coating does notrequire a solventto keep the binder and filler parts in a liquidsuspension form. Thecoating is typically applied electrostatically andis then cured underheat to allow it to flow and form a "skin". Thepowder may be a thermoplastic or a thermoset polymer.It is usually usedto create a hard finish that is tougher thanconventional paint. Powdercoating is mainly used for coating of metals, such as "whiteware,"aluminium extrusions, and automobile and bicycle parts. Newertechnologies allow other materials, such as MDF (medium-densityfibreboard), to be powder coated using different methods.
The powder coating process involves three basic steps:
- Part preparation or the pre-treatment
- The powder application
- Curing
