>Material – Bolt: Carbon Steel, Stainless Steel 316 (A4)
>Corrosion Protection: Zinc Plating, Hot Dipped Galvanising
>Head Styles: Hex Nut
>Fixing Method: Through Fixture
>Setting Method: Chemical
>Anchoring Method: Chemical
>Thread Diameters: M8, M10, M12, M16, M20, M24
>Anchor Lengths: 110mm, 130mm, 160mm, 190mm, 260mm, 300mm
>Substrates: Concrete, Solid Brickwork
>Corrosion Protection: Zinc Plating, Hot Dipped Galvanising
>Head Styles: Hex Nut
>Fixing Method: Through Fixture
>Setting Method: Chemical
>Anchoring Method: Chemical
>Thread Diameters: M8, M10, M12, M16, M20, M24
>Anchor Lengths: 110mm, 130mm, 160mm, 190mm, 260mm, 300mm
>Substrates: Concrete, Solid Brickwork
>Installation:
1. Drill or core hole to specified diameter and depth
2. Remove dust and debris by brushing and blowing 3 times each (If hole is wet or flooded, brush only)
3. Insert capsule into hole
4. Fit socket into drill and use to rotate and drive a ChemSet™ Anchor Stud into the hole
5. The stud rotation will mix the capsule contents
6. Wait until adhesive has fully cured before loading (see Loading Time chart below)
1. Drill or core hole to specified diameter and depth
2. Remove dust and debris by brushing and blowing 3 times each (If hole is wet or flooded, brush only)
3. Insert capsule into hole
4. Fit socket into drill and use to rotate and drive a ChemSet™ Anchor Stud into the hole
5. The stud rotation will mix the capsule contents
6. Wait until adhesive has fully cured before loading (see Loading Time chart below)
