Description:
Drier ismainly used for drying wet materials in building construction, metallurgy,chemical industries, and it can dry various materials with strong adaptability.Besides, it is common drying device in cement plant with simple and reliableoperation.
Thefeatures:
1.Reasonable design of raising board and angle ensure the materialwell-distributed and dry with less time, it has reliable operation and highenergy utilization ratio, simple maintenance.
2.Adopt an adjustable center tug structure, the good cooperation of the tug andthe rolling ring reduce the attrition and energy consumption.
3.The special structure of the dam-wheel decrease the horizontal thrust, when themachine working in inclination station, it has strong ability ofanti-overloading, steady operation and high reliability.
4.High temperature resistance, it can use the high temperature to dry the materialquickly,
5.Large capacity, few fuel consumption, low drying cost.
TechnicalParameters:
Model(mm) | Gradient(%) | Speed(r/min) | InletTemperature(C) | Power(Kw) | Capacity(m3) | Weight(t) |
GWΦ600 | 3-5 | 3-8 | ≤700 | 3 | 1.69 | 2.9 |
GWΦ800 | 3-5 | 3-8 | ≤700 | 4 | 4.01 | 3.5 |
GWΦ1000 | 3-5 | 3-8 | ≤700 | 5.5 | 7.85 | 5.6 |
GWΦ1200 | 3-5 | 3-8 | ≤700 | 7.5 | 11.30 | 14.5 |
GWΦ1500 | 3-5 | 2-6 | ≤800 | 15 | 21.19 | 17.8 |
GWΦ1800 | 3-5 | 2-6 | ≤800 | 18 | 30.52 | 25 |
GWΦ2000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 45.59 | 33 |
GWΦ2200 | 3-5 | 1.5-6 | ≤800 | 22 | 68.38 | 53.8 |
GWΦ2400 | 3-5 | 1.5-5 | ≤800 | 37 | 90.43 | 60 |
GWΦ2500 | 3-5 | 1.5-5 | ≤800 | 55 | 141.3 | 78 |
GWΦ3000 | 3-5 | 1.5-5 | ≤800 | 75 | 176.6 | 104.9 |