This product adopts electric generator and solar panel for power generation to charge its inside 40mAh/3.6V chargeable lithium battery. The power stored is transformed to the LEDs used for lighting. With a Torch Switch to control the model: 3LED on→Off.
Features:
1.Cranking for power, low noise but high efficiency.
2.Absorb solar energy for power. Green energy and environment protection.
3.3pcs Ultra bright LED
4.Newfangled design which can charge the flashlight by cranking and solar, Need no batteries.
1) Main Technical Parameters:
The Max. Luminous flux | ≥12 Lm |
The Max. beam luminous intensity | ≥ 50000mcd |
Lighting time after full charged | ≥2hours |
Lighting time after 1 minute cranking | ≥10 Minutes |
Lighting time after 1hours charging by light energy | ≥10 Minutes |
Full charging time by light energy | ≥30 hours |
Lighting distance(Center pointluminous intensity 0.2lux) | ≥10m |
LED lifetime | ≥100000 Hours |
2) Main parts life-span:
Switch | ≥10000 Times |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
3) Size and Weight:
Product size | 91*48*34mm |
Product net weight | 75.5g |
4) Others:
Specification of built-in battery | Chargeable lithium battery,40mAh,3.6V |
Solar Panel: | 5.4v,5mAh amorphoussilicon cell panel |
Material of main body | ABS |
Charging operation:
1.Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.
2.Put the flashlight in the sunlight, it will charge its inside battery automatic.
Picture of Dynamo solar powered 2 in 1 3 LED Solar Flashlight
Hand Cranking to generate the electric power
Picture of Dynamo solar powered 2 in 1 3 LED Solar Flashlight
Hand Cranking to generate the electric power