1,powder paint coating oven of powder coating system
2,used for curing the workpiece which has been spraying during the powder
When a thermoset powder is exposed to elevated temperature, it begins tomelt, flows out, and then chemically reacts to form a higher molecularweight polymer in a network-like structure.
Structure:consist of Body,insulation, cover, heater. use gas to create the energy ,through the circulating fan ,make the temperature in the oven to rise uniformly. Then make the temperature of workpiece to rise..
built-in track to roll your powder coating racks into the ovens could be ordered together as you required.
Electricity powder coating oven
Technical Data
| Inner Size | L3500mm*W2000mm*H1500mm | ||||
| Outter Size: | L4700mm*W2250mm*H1750mm | ||||
| Material: | t1.2mm galvanized plate | ||||
| Thickness Insulation: | 120mm | ||||
| Power supply: | GAS | ||||
| Voltage: | 110V/220V/380V | ||||
| Frequency: | 50-60Hz | ||||
| Door type: | Double sided | ||||
| Warm-up time: | 15 min. (180-220° C) | ||||
| Homogeneity: | < ± 3°C if 185°C | ||||
| Temperature stability: | < ± 1°C | ||||
| Temperature max. | 230° C | ||||
| Transport: | Top | ||||
| Air circulation: | Forced | ||||
| Band of burner: | Italian Riello | ||||
| Model of burner | RIELLO 40 FS 20 | ||||
| burner capacity: | 200,000 KCAL (81-220kw) | ||||
| power of motor | 0.15KW | ||||
| Total power of burner | 0.25KW | ||||
| Warranty: | 12 Months | ||||
Curing oven is U type, full-bridge structure, oven body is assembled construction.
The insulated panel: External δ 0.8mm cold-rolled board, internal: δ 0.8mm galvanized board.
Insulate layer: Thickness 120 with high quality rock wool 
Heating system:
Insulation heating chamber: 100000kcal/h, quantity: 1set
Hot air circulation blower: Rotational speed: 2840r/min, power: 1.5KW
Stainless steel electric heating tube: 1KV*6PCS, total powder 6KW
Temperature: 0-200 centi-degree 
We can also produce other different size of oven, please let us know if you have any other requirements.
Power | Compressed air data | ||
Pulse power | 15-20 colck/sec. | Max. Input are pressure | 10bar/145psi |
Input voltage: | 110v-220v | Min inpur air pressure: | 6ar/87psi |
Frequency: | 50-60Hz | Max water vapour content: | 1.3G/nm3 |
Input power: | 50W | Powder hopper capacity: | 45L/55L |
Putput voltage: | Max. 20v(peak-peak value) | Pneumatic control voltage: | 24VDC |
Output current: | Mas. 0.8A | ||
Drawing
