Bit type | IADC Code | Applicable formation | Cutting sructure | Normal WOB KN/mm(bit dia.) | Rotary Speed(rpm |
THAS437 | 437 | Very soft with low compressive strength and high drillability,such as shale,clay,sandstone and conglomerate,etc. | Large dia offset crested scoop compacts in inner row,wedge compacts in outer row,and with the cutting structure of primary and secondary cutters with double bresking lines on bottom hole. | 0.35-0.95 | 140-60 |
You can choose the size of rock bits below or we can manufacture bits as your request
Tricone bit size | Thread sizes | NO. | Tricone bit size | Thread sizes | ||||
Inch | mm | inch | mm | |||||
1 | 3-3/4 | 95.3 | 2-3/8 | 28 | 9-5/8 | 244.5 | 6-5/8 | |
2 | 3-7/8 | 98.4 | 2-3/8 | 29 | 9-7/8 | 250.8 | 6-5/8 | |
3 | 4-1/8 | 104.8 | 2-3/8 | 30 | 10-1/2 | 266.7 | 6-5/8 | |
4 | 4-1/4 | 108.0 | 2-3/8 | 31 | 10-5/8 | 269.9 | 6-5/8 | |
5 | 4-1/2 | 114.3 | 2-3/8 | 32 | 11 | 279.4 | 6-5/8 | |
6 | 4-5/8 | 117.5 | 2-7/8 | 33 | 11-5/8 | 295.3 | 6-5/8 | |
7 | 4-3/4 | 120.7 | 2-7/8 | 34 | 12 | 304.8 | 6-5/8 | |
8 | 4-7/8 | 123.8 | 2-7/8 | 35 | 12-1/4 | 311.2 | 6-5/8 | |
9 | 5-1/2 | 139.7 | 3-1/2 | 36 | 12-5/16 | 312.7 | 6-5/8 | |
10 | 5-5/8 | 142.9 | 3-1/2 | 37 | 12-3/8 | 314.3 | 6-5/8 | |
11 | 5-2/3 | 143.9 | 3-1/2 | 38 | 12-7/16 | 315.9 | 6-5/8 | |
12 | 5-3/4 | 146.1 | 3-1/2 | 39 | 12-5/8 | 320.7 | 6-5/8 | |
13 | 5-7/8 | 149.2 | 3-1/2 | 40 | 13-1/8 | 333.4 | 6-5/8 | |
14 | 6 | 152.4 | 3-1/2 | 41 | 13-1/2 | 342.9 | 6-5/8 | |
15 | 6-1/8 | 155.6 | 3-1/2 | 42 | 13-5/8 | 346.1 | 6-5/8 | |
16 | 6-1/4 | 158.8 | 3-1/2 | 43 | 13-3/4 | 349.3 | 6-5/8 | |
17 | 6-1/2 | 165.1 | 3-1/2 | 44 | 14-1/2 | 374.7 | 7-5/8 | |
18 | 6-5/8 | 168.3 | 3-1/2 | 45 | 14-3/4 | 374.7 | 7/5/8 | |
19 | 6-3/4 | 171.5 | 3-1/2 | 46 | 15-1/2 | 393.7 | 7-5/8 | |
20 | 7-1/2 | 190.5 | 4-1/2 | 47 | 16 | 406.4 | 7-5/8 | |
21 | 7-5/8 | 193.7 | 4-1/2 | 48 | 17-1/2 | 444.5 | 7-5/8 | |
22 | 7-7/8 | 200.0 | 4-1/2 | 49 | 18-7/8 | 479.4 | 7-5/8 | |
23 | 8-3/8 | 212.7 | 4-1/2 | 50 | 20 | 508.0 | 7-5/8 | |
24 | 8-1/2 | 215.9 | 4-1/2 | 51 | 22 | 558.8 | 7-5/8 | |
25 | 8-5/8 | 219.1 | 4-1/2 | 52 | 24 | 609.6 | 7-5/8 | |
26 | 8-3/4 | 222.3 | 4-1/2 | 53 | 26 | 660.4 | 7-5/8 | |
27 | 9-1/2 | 241.3 | 6-5/8 |
Medium hard formation TCI tricone bits:
The medium hard formation TCI tricone bits features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
our tenet
Quality laid foremost,
Customer regarded supreme,
Developing between us,
Prosperity pursuing together.
If you are interested, we will be happy to send you any further information.Don't hesitate to contact us and welcome to visit our factory. We are looking forward to adding you as our Cooperation partner.