16 Channels BNC Video Lightning Protection Device 10 ~ 20ka

1. Name: lightning surge protection devices, industrial surge protector, video surge protector, network surge protector
2. Un rated working voltage: 6V
3. Uc maximum sustained voltage: 8V
4. Up level of protection: <70V
5. In nominal discharge current (8 / 20): 10KA
6. Maximum discharge Imax (8 / 20): 20KA
7. Return Loss AR: ≤ 20 db
8. Wiring: BNC
9. Application: Security monitoring equipment, remote control and transmission

16 Channels Bnc Video Lightning Protection Device 10 ~ 20ka

>Video Lightning Protection Device has IEC standard design. It’s thread three filter circuit design pressure protection, low residual voltage, special production process, appearance generous novel.

>Ease of installation. Main Fine lines in the video signal-Surge / flow overvoltage protection, a road or road transport interface, fully meet user needs. monitoring works is the preferred product.

Features: 

-Fine-over-voltage surge protection
large flow (10 ~ 20KA)
remnant low pressure (Tandem Protection)
high-speed response (1 ~ 25 ns)
low loss (import plug-Line Design)
long maintenance-free life
3 filter pressure protection
 

Applications:

Security monitoring equipment, remote control and transmission
figures public broadcasting system
Intelligent Community water, electricity, gas Table
 

Environmental requirements:

temperature: -40 to 70
Relative Humidity: indoor temperature conditions 30% ~ 90%

Complete machine features: 

Un rated working voltage: 6V
Uc maximum sustained voltage: 8V
Up level of protection: <70V
In nominal discharge current (8 / 20): 10KA
Maximum discharge Imax (8 / 20): 20KA
Reaction time tA: <25ns
Vs video transmission rate of 1 to 20Mbps
Insertion loss AE: <0.5db
Return Loss AR: ≤ 20 db
Shell material: metal
Protection Level: Fine-level protection
Shell protection levels: IP20
Wiring: BNC
Protected Mode: three fine filter pressure protection
Ground Resistance Ω / diameter: ≤ 4 Ω / 2.5
Standard: GBl8802.1, lEC61643-1
 

Installment and Application:

1. This products is in series in the I/O port;
2. Protector line (IN) connected with signal channel; the equipment end (OUT) connected with protected input connector;
3. The product’s grounding for lightening port and the machine room’s joined in junk ring;
4. All the connecting should be fastness and connected with reliable electric
5. Lightning protection should accord with the requirements, the ground wire should be as tubbiness as possible, the ground resistance should be less than 10Ω;
6. Ground wire ≥2.5m

Order Information:

Accessories in the package: