- Application:CR/HRC/stainless steel /galvanized
- thickness of coil plate:1-4mm
- width of coil plate:1250mm
- coil weight:10MT(max)
- line speed:0-40m/min
Automatic Steel Slitting Line For Hot Rolled Coils 2mm Thick ,1250mm Width
Specifications:
|
Application: |
CR/HRC/stainless steel /galvanized and so on |
|
thickness of coil plate: |
1-4mm |
|
width of coil plate: |
1250mm |
|
coil weight: |
10MT(max) |
|
coil I.D: |
508 |
|
coil O.D: |
1400mm |
|
the diameter of slitting blade shaft |
160 |
|
slitting blade: |
φ180Xφ320X20 |
|
material of slitting blade: |
9CrSi |
|
the hardness of slitting blade: |
HRC58°-60° |
|
recoiler I.D: |
φ508 |
|
power: |
380V/50Hz/3Ph |
|
tolerance of width error: |
≤±0.05mm/2M |
|
line speed |
0-40m/min |
|
area of the whole machine: |
20m(L)x6m(W) |
|
Production orientation |
from left to right |
1. Hydraulic entry coil car
The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
It is driven vertically by hydraulic cylinder with four guide pillars.
The level movement is driven by cycloid motor .
The capacity it can carry is 10 Tons(MAX).
2. Hydraulic cantilever un-coiler
Supporting steel rolls and uncoiling.
It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.
Moment motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
The capacity it can carry is 10 Tons(MAX).
3. Hydraulic pinch and press and straightening machine
This is composed of bottom-stand(frame), hydraulic pressing and guiding arm, coil opener, hydraulic shovel head device, hydraulic pinch and preliminary flattening device, power device, etc
The gap between rollers can be adjusted manually to make sure the leveling quality.
4. Hydraulic cutting machine
It is used to make the plates easy to the next process by cutting the head even.
Adopt double structures, a pressure loading device, can cut the 4X1250steel plates.
