Products name: DC24V CA-45DD 1.5" pulse valve
CA / RCA DD series pulse valve is a high performance diaphragm valve with dresser nut in the outlet and inlet ports, An option for solenoid pilot control valve and air control pulse valve, DD-series is right-angle design.
Application
Dust collector applications, for reverse pulse jet filter
cartridge dust collector
envelope dust collector
ceramic dust collector
sintered metal fibre dust collector.
Installation
cartridge dust collector
envelope dust collector
ceramic dust collector
sintered metal fibre dust collector.
Installation
1. MM valves are installed directly on the tank
2. To avoid any potential operational problems it is preferable that the valves are not mounted underneath the tank where condensation may collect. All o-rings should be coated with a silicone based lubricant or similar.
2. To avoid any potential operational problems it is preferable that the valves are not mounted underneath the tank where condensation may collect. All o-rings should be coated with a silicone based lubricant or similar.
3. Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes. Tanks and blowtubes must be independently restrained.
4. Tighten dresser nuts to 20Nm (15 ftlbs) max.
5. Tighten pipe outlets to 20 Nm (15 ftlbs).
6. Connect to Goyen pilot valve, if remotely actuated.
7. Ensure compressed air supply is clear
8. Check all cleaning system components are secure before applying pressure.
8. Check all cleaning system components are secure before applying pressure.
9. Apply moderate pressure and check for leaks.
10.Fully pressurise system.
DC24V CA-45DD 1.5" pulse valve dimension
DC24V CA-45DD 1.5" pulse valve specification
DC24V CA-45DD 1.5" pulse valve dimension
DC24V CA-45DD 1.5" pulse valve specification
| Type | Orifice | Port Size | No Of Diaphragm | KV/CV |
| CA/RCA25DD | 25 | 1" | 1 | 20/23 |
| CA/RCA45DD | 40 | 11/2" | 2 | 44/51 |
DD series pulse valve diaphragm repair kits
| Model | Diaphragm Kits | |
| Nitrile | Viton | |
| CA/RCA-20DD | K2000 | K2007 |
| CA/RCA-25DD | K2501 | K2503 |
| CA/RCA-45DD | K4501 | K4503 |
DC24V CA-45DD 1.5" pulse valve order code
Maintenance:
Ensure that all system components pressure relief and cut the current completely before system maintenance. Until the valves and all parts have been securely installed, then open the power to increase the pressure.
Ensure that all system components pressure relief and cut the current completely before system maintenance. Until the valves and all parts have been securely installed, then open the power to increase the pressure.
Diaphragm and pilot should be a routine inspection per year to keep it intact.
