powder coating machinery / powder coating machine
- Two individual control panels housed two racks.
- Operate Two powder coating guns simultaneously
- Approved as per the European CE regulations
Manual Electrostatic Powder Coating Equipment With Dual Gun Unit
DUAL - Manual Powder Coating Equipment
COLO-800D-2
DUAL-Powder coating equipment specially designed for online powder coating plant
Two smart trackers for two panels.
• Two individual control panels housed two racks.
• Operate Two powder coating guns (corona o) simultaneously from two separate control panels.
• Powder feeding though the same hopper to assure uniformity in powder feeding.
• Individual powder and KV setting for each system.
• Approved as per the European CE regulations
Device parameters:
|
Electronic Controller |
Pneumatic Controllers |
Electrostatic powder spray gun |
|||
|
Input Voltage |
Single-phase:200-240V |
Solenoid valve control voltage |
24DC |
Input |
18VPP |
|
Input power |
50VA |
Input pressure |
10KGF/OM2 |
Voltage Frequency |
Around 25KHZ |
|
Input |
18VPP |
Output pressure |
0~8KGF/CM |
Input Current |
1.2A |
|
Voltage Frequency |
20KHZ Around 25KHZ |
Output Voltage |
0~100KV DC |
||
|
Input Current |
Around 7.2A |
Cable |
5M |
||
|
Cable |
4M |
Weight |
Around 530G |
||
|
Solenoid valve control voltage |
24V DC |
Safety Standards |
1P54 |
||
|
Packing Size |
117*73*79CM |
Output powder volume |
About 600G/MIN |
||
