Introduction:
The filtration media of PP micropore filter cartridge is superfine PP fibre membrane. It is a fixed and depth filter cartridge with a wide range of pore size from 0.1um to 60um, the materials comply with FDA related requirements. It is the first choice of pre-filtration due to its unique low differential pressure, high flow rate and long service life feature. The structure of PP has stable performance and wide chemical compatibility.
Specification and technical paramenters:
Filter medium: PP fibre membrane
Support layer: PP
Filter cage: PP
Pore size: 0.1, 0.2, 0.45, 0.65, 1, 3, 5 (um)
Length: 4", 5", 10", 20". 30", 40"
Sealing material: Silastic, NBR, EPDM, Viton
Airtight method: thermal bonding technique
Effective filtration area: 0.4~0.7m.m/10"
Diameter: 69.0mm
Max. operating temperature: 90℃,(P≤0.1Mpa)
Max. positive pressure: 0.42Mpa(25℃)
Max. back pressure: 0.28Mpa(25℃)
PH value: 1--13
Sterilizing temperature: 121℃ 30min
Others: special requirement of diameter and end caps can be customized
Seloct filter cartridge, refer to p10 (Interface/End caps)
Typical Applications:
Medical industry: filtration for medical liquid, cell debris, biologicals
Chemical industry: filtration for organic solvent, chemical reagent, electroplate liquid, ink.
Food industry: drinking water, mineral water, beverage, beer, wine
Electronic industry: pre-filtration on water system both for counter infiltration, deionized water
Others: photoresist, magnetic media
Complete test (minimum bubble point)(25℃;95%isopropanol)
0.20um >=0.105Mpa
0.45um >=0.075Mpa
