wagner powder hose / powder feed tube
1. max. 4 kOhm/cm Conductivity
2. POE Polyolefine-Elastomere Material
3. 10 mm, 11 mm and 12 mm diameters
POE Powder Coating Gun Conductive Hose 10 /11 / 12 mm Dia , 58 PSI
conductive powder hose
When powder paints are carried by a flow of air, as is the case in a powder coating plant, electrostatic charging occurs. Normally this charge is taken away by earthing. With powder hoses this is not possible, as they are made of plastic, which is known to be a non-conductive material.
To alleviate this situation the new powder hose from Wagner has an electrically conductive carbon strip, which dissipates the frictional charge. For this the hose is earthed though an earthing contact on the outside or the inside e.g. on the powder injector.
The electrically conductive powder hose is available by the metre in diameters of 10 mm, 11 mm and 12 mm
|
Specifications |
|
|
Conductivity (strip): |
max. 4 kOhm/cm |
|
Material : |
POE Polyolefine-Elastomere |
|
Resistance to pressure: |
max. 4 bar (58 PSI) |
|
Bend radius : |
min. 60 mm (2.3 ") |
|
Temperature range: |
10 - 40 °C (50 -.104°F ) |
|
Maintenance, care : |
Blow out ( flush out with pulses of air ) |
At same time we supply common pvc powder hose for common powders
