HID compatible proximity card reader.It reads all HID standard 125KHz proximity card serial number and transmits it to the access control system using the common Wiegand interface or any other OEM interface requirements in the future
1. Specification:
l Voltage DC9V
l Current <50 mA
l Interface: Weigand26/34,RS485/232
l Reader Range: 5 - 10 cm
l Frequency: 122-128KHz
l Operation Temperature: -20°C to +65°C
l Operationg humidity: 5%-95% relative humidity non-condensing
l Audio/Visual Indication: Green & Red and Buzzer signal output
l Response Time: Less than 0.2 seconds
l Cable length: 250mm
l Waterpoof: IP65
2.Wiring :
Name | Signal Tpye | Color | Detail | |
VCC | Power | Red | Power DC 9V-12V | |
GND | Power | Black | Powe GND | |
SHIELD GND | GND | SHIELD GND | ||
DATA0 | OUT | Green | Wiegand output D0 | |
DATA1 | OUT | White | Wiegand output D1 | |
GRN LED | IN | Orange | Green LED control,Low effective | |
RND LED | IN | Brown | Red LED Control,Low effective | |
Beep CNTRL | IN | Yellow | Buzzer control,Low effective | |
HOLD | OUT | Blue | Data valid signal line, Low effective | |
Card PRESENT | OUT | Purple | Card PRESENT,Low effective |