Standard: LV and MV polymeric insulated cables for use bydistribution and generation utilities. Specification for distribution cables ofrated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wireconcentric cables with copper or aluminium conductors
Conductors: Stranded Annealed Copper
Insulation: XLPE (Cross-linkedPolyethylene)
Concentric layer: Single layer of plainannealed copper wires
Concentric layer: Single layer of plainannealed copper wires
Sheath/Jacket: XLPE (Cross-linked Polyethylene)
Voltage: 600/1000v
Operating temperature: Maximum 90°C, minimum -30°C
Common Used Colours:
For insulation: White, Black and Red.
For external jacket: Black
PACKAGING:
Wooden Drum
Or length to the client's requirement.
Available Size: MM2, AWG or MCM
10 16 25 35 50 70 95
2 x 8 2 x 6 2 x 4 2 x 2 2 x 1/0 2 x 2/0 2x8 2x10
3 x 8 2x6 3 x 6 2x4 3 x 4 2x2 3 x 2
3 x 1 0 3 x 2/0 4 x 8 4 x 6 4 x 4 4 x 2
250 300 and so on
Application
Power cables for energy supply are used for industry and distribution boards,power stations, house connecting boxes and street lighting as well as controlcable for the transmission of control impulses and test data. Overall, whereincreased electrical and also mechanical protection are required. Those cablesare installed in open air, in underground, in water, indoors and in cable ducts.The concentric conductor (C) is allowed to use as PE-, PEN-conductor or asshield. due to the typical construction of concentric conductors it is possibleto obtain many more cable joints, without cutting any conductor. In that way theoperating reliability is guaranteed.
Some common use model
Type | Description | Applicationn | |
Cu | Al | ||
YJV | YJLV | XLPE insulation PVCsheath power cable | To be laid indoors,in tunnel, cable furrow or pipe, the cable couldn't bear mechanical forceoutside |
YJY | YJLY | XLPE insulation PEsheath power cable | |
YJV22 | YJLV22 | XLPE insulation,steel tape armor,PVC sheath power cable | To be laidunderground, the cable could bear certain mechanical force, but it couldn't beargreat pulling force. |
YJV23 | YJLV23 | XLPE insulation,steel tape armor,PE sheath power cable | |
YJV62 | YJLV62 | XLPE insulation,have no the magnetism steel tape armor,PE sheath powercable | |
YJV32 | YJLV32 | XLPE insulation,thin steel-wirearmor,PVC sheath power cable | Be applicable to thewell, water inside and fall in the bad soil, the cable cans bear the equal dintoutside the machine with pull the dint . |
YJV72 | YJLV72 | XLPE insulation,have no the magnetism thick steel-wirearmor,PVC sheath powercable | |
YJV42 | YJLV42 | XLPE insulation,thick steel-wirearmor,PVC sheath power cable | Be applicable to thewell, underwater with the bottom of sea, the cable cans bear the bigger pressurewith lead to pull the dint. |
| 1stclass | 0.6/1kv | 1.8/3kv | 3.6/6kv | 6/10kv | 8.7/15kv | 12/20kv | 18/30kv | 21/35kv | |||
2ndclass | 1/1kv | 3/3kv | 6/6kv | 8.7/10kv | 12/15kv | 18/20kv | - | 26/35kv | ||||
1Core | Section area(mm2) | 1.5-800 | 25-800 | 25-800 | 25-800 | 35-800 | 50-800 | 50-800 | 50-800 | |||
2Core | Section Area(mm2) | 1.5-185 | / | / | / | / | / | / | / | |||
3Core | Section area(mm2) | 1.5-400 | 25-400 | 25-400 | 25-400 | 35-400 | 50-400 | 50-400 | 50-400 | |||
4Core | Section Area(mm2) | 2.5-400 | 25-400 | / | / | / | / | / | / | |||
5Core | Section area(mm2) | 2.5-400 | 25-400 | / | / | / | / | / | / |