1.Provide stable charging environment.
2.High definition LED screen which can show thecharging time,charging voltage and charging voltage.
3.Intelligent charge method.We got aintelligent charge control panel which can feel the temperature sensitively.Assoon as the panel receive the high temperature signal,it will start the coolingsystem immediately.At the same time ,it will low the current to protect yourbattery.
4.Fanshion appearance with green color. Ourportable battery charger are in good looking appearance.We use plastic materialaround the holder part which is higher-cost than aluminum.But this can make ourcharger much lighter.What's more ,the design of holder is much more comfortablefor using.It's more humanized.
5.Only one button,very easy opperation.
Product details
Model | Voltage | Current |
ADMC-2420 | 24V | 20A |
ADMC -2430 | 24V | 30A |
ADMC-2440 | 24V | 40A |
ADMC-2450 | 24V | 50A |
ADMC-3630 | 36V | 30A |
ADMC-4825 | 48V | 25A |
ADMC-4830 | 48V | 30A |
ADMC-4840 | 48V | 40A |
ADMC-6025 | 60V | 25A |
ADMC-7220 | 72V | 20A |
1. Ultra-low Frequency Composite Pulse Charge
Prevent new battery sulphation, remove the oldbattery curing, remove the concentration polarization of electromagnetic.
2. Automatic TemperatureCompensation
Automaticequalizing charge, the battery pack to prevent an imbalance.
3. Automatic EqualizedCharging
Ensure theoverall battery life
4. OverheatProtection
Automaticallyadjust charging
5. Short-CircuitProtection
Chargerautomatically identifies internal control circuit
6. Reverse PolarityProtection
Not startcharging, the battery and the charger itself does not have anydamage.
7. Input Low Voltage &Overvoltage Protection
Voltage is below180V or above 265V, charger self- protection function is activated.
Charging Step
Charging step
Step 1:Constantcurrent charge:Automatically adjust the charge voltage,the battery willbe charged in a constant current to prevent the injury from high current. TheBattery will be charged to85%-90%.
Step 1:Constantcurrent charge:Automatically adjust the charge voltage,the battery willbe charged in a constant current to prevent the injury from high current. TheBattery will be charged to85%-90%.
Step 2:Constant voltage charge:After step 2,thebattery voltage will stay in a constant level.We are strictly control thisvoltage. Because the battery will be water loss and over charge in highvoltage.
Step3:Equalizing charge.Make sure eachcell are fully and same charged.
Step 4:Floating charge,when the battery almostfully charged,our charger will step to floating charge. In this step,our chargerwill charge the battery in a very small current to protect the battery overcharge.
.jpg)
