This product adopts electric generator and solar panel for power generation to charge its inside 40mAh/3.6V chargeable lithium battery. The power stored is transformed to the LEDs used for lighting. With a Torch Switch to control the model: 3LED on→Off.
Features:
1.Cranking for power, low noise but high efficiency.
2.Absorb solar energy for power. Green energy and environment protection.
3.3pcs Ultra bright LED
4.Newfangled design which can charge the flashlight by cranking and solar, Need no batteries.
1) Main Technical Parameters:
| The Max. Luminous flux | ≥12 Lm |
| The Max. beam luminous intensity | ≥ 50000mcd |
| Lighting time after full charged | ≥2hours |
| Lighting time after 1 minute cranking | ≥10 Minutes |
| Lighting time after 1hours charging by light energy | ≥10 Minutes |
| Full charging time by light energy | ≥30 hours |
| Lighting distance(Center pointluminous intensity 0.2lux) | ≥10m |
| LED lifetime | ≥100000 Hours |
2) Main parts life-span:
| Switch | ≥10000 Times |
| The whole unit | ≥5 Years |
| The plastic part | ≥5 Years |
3) Size and Weight:
| Product size | 91*48*34mm |
| Product net weight | 75.5g |
4) Others:
| Specification of built-in battery | Chargeable lithium battery,40mAh,3.6V |
| Solar Panel: | 5v,6mAh amorphoussilicon cell panel |
| Material of main body | ABS |
Charging operation:
1.Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.
2.Put the flashlight in the sunlight, it will charge its inside battery automatic.
Cautions:
Don't point at eyes directly so as not to hurt the eyes.
Pay attention to the holding gesture when cranking so as not to hurt your fingers.
In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.
b) please crank it for at least 1 minute once a month.
Do not place this product in where temperature or humidity is high.
Do not drop or hit this product.
The product will be a little heated when cranking for a long time.
We reserve the right to change the specifications of the hardware and software described in this manual without prior notice.
