VAG 5053 Interface
:CTV016
The latest version of the popular VCDS detection software, support for the latest Volkswagen cars.
* Full support for the latest "Service22" recognition control module unit
* Support the use of the latest "UDS / ODX / ASAM" diagnostic protocol control module unit. Control module identification (including advanced recognition), coding, security access / allowed to enter, and the fault code
* The new process logging
* Support normal OBD2 function mode 10
* Support the use of two vehicle engine control modules, such as the RS4 and W12 engines. You may be able to address over 31, and enter the two engine control module, perform functions such as throttle matching (TBA) the class action
* Match the screen enhancements, support for the value of some very long matches the control module
* Advanced logo enhancements, more flexible data handling
* New internal Gateway Coding assistance, particularly for vehicles based on the Audi B8 platform
* Increase the upgrade file revision tag
* New service reminders (repair and maintenance services) function
* Support for leading the program ready
* Optical Bus Diagnostics
* Battery coding assistance
* Save and block access to advanced measurement configurations
* Compatibility with the latest surge models
* Supporting the new USB installation
Functions
A. Real-time about the status of your car. Engine speed throttle opening the battery voltage, etc., user-friendly as the case may take measures to repair.
B. Read, clear fault codes
C. Read three dynamic data flow, waveform analysis.
D. automatic latch, unlocking and flashing lights and sound speaker set
E. Remote match, match the original key
F., and four single door unlock unlocked (default) settings
G. Cleaning matching Throttle
H. The new seven PIN / SKC codes to match all security systems installed mobilizer VW / Audi / Seat / Skoda car keys (ie, third generation anti-theft)
Basic Features:
-Read trouble code, clear trouble code and therefore
Look at your car have failed to prevent major failures.
To protect the fuel economy and comfort.
-Automatic latch, unlocking and flashing lights and sound speaker set
1, into the computer system 46 comfortable
2, to adjust and match into the 10
1) Input channel
Channel 03 15km / h automatically lock the door
Channel 04 automatically lock remove the car keys
Channel 05 remote unlocking warning horn will beep; comfortable computer system to access an alarm horn
06-channel remote control to lock the door warning horn will beep 1; comfortable computer system to access an alarm horn
(Only the original imported pineapple / Golf / Passat / Bora factory default installation of the alarm horn)
Channel 07 remote unlock all turn signals flash simultaneously under 2
08-channel remote control to lock the door while all the turn signals flash 1
2) Enter the adjustment value 1 = open this function
0 = turn off this feature (a new car factory default state is off, "0")
-And four single door unlock unlocked (default) settings
1, into the computer system 46 comfortable
2, re-encoded into the 07
With four electric windows. At the same time on four coding is 00259; only open a code is 00258
With 2 electric windows. At the same time on four coding is 00067; only open a code is 00066
Do not live window. At the same time on four coding is 00019; only open a code is 00018
-The key to turn off the lights to open the door without warning tone is set aside
1, into the 17 dashboard electrical
2, re-encoded into the 07
1) To open the door to remind: the encoding is set to 00341 (the original code 00141), the light does not open the door remains closed former director of the sound a warning tone;
Lights off, the key did not pull, pendant pendant pendant will be a warning tone.
2) If necessary to open the door to remind, but also 125KM speed reminder: the encoding is set to 00641
-Remote control matches
1, into the computer system 46 comfortable
2, 10 matches into the adjustment
1) Enter the channel number 01;
2) Enter the new value matches the number of remote
3) Save
4) Each remote control press 2 seconds.
-The key to match the original
1, into the 17 dashboard electrical
2, into 11 Home
3, enter the password (obtained from the 4S shop)
4, 10 matches into the adjustment
1) Enter the channel number 21;
2) Enter the new value of the number of all key
3) Save
4) Unplug the car keys, car keys to the first two into the open 3 seconds, unplug the
5) the first three car keys into the open for 3 seconds to complete.
-Check the throttle state
1, into the engine 01
2, into 08 data monitoring
Group No. 03
The third column is the throttle opening angle throt angle, note the engine to warm up too (water temperature 90 degrees), or high value,
Value of more than 5 (normal range should be 1-5) on the washed
-Matching idle
1, into the engine 01
2, 10 matches into the adjustment
1) Enter 01 in the channel number
2) Enter the new value of 124-132 (this value is Polaris, POLO's available)
3) Save
The actual idle speed adjustment range depends on the value and the specific conditions of the engine and ECU. Easy to hold in the low idle speed, high oil
-Matching throttle clean
1, into the engine 01
2, into 04 basic settings
1) Enter the group number 060, according to GO!
2) until the data OK.
