HAKKO 942 Soldering station

HAKKO 942 Soldering station

Solding and heating core two in one, with the 70W power consumption, heat recovery function is very powerful, especially suitable for low temperature lead-free welding and welding.
Temperature control by card, to avoid staff randomly changing the welding temperature
A fault signal device, when the welding temperature is lower than the minimum alarm range or parts such as heat core, circuit board failure welding station
Would ring fault signal, indicating that the staff check.
Digital welding temperature calibration function.
Only 30mm distance between welding and soldering iron handle, flexible operation.
Replacement of welding Tsui is fast and convenient, only need to use the thermal pad welding Tsui pulled out and then set the new welding Tsui can.
Automatic shutdown function.
Eliminate static design, stable grounding impedance, with the 24V output of the heating core, absolutely can protect sensitive components and the safety of staff.
Light welding units of lead-free soldering station 942 welding HAKKO welding hakko942 welding soldering station

942 lead-free solder Station specifications

Model 942
The power consumption of 75W

HAKKO 907 iron handle for 942 soldering station
Output voltage 24V
The temperature range of 200~450 ℃
Temperature stability of ± 5 ℃ (no load)
The external dimensions of 188 (L) x 100 (W) x 106 (H) mm
The body weight of 2.5kg
Soldering iron

Model 907

Heating element AC 24V 70W Ceramic
(heating core with welding Tsui)
Welding Tsui and grounding impedance is less than 2
Welding nozzle and the ground potential below 2mV
Wire length 1.2m
The length of the handle (not including wire) 172mm (T2-24D welding)
Handle weight (not including wire) 30g (T2-24D welding) soldering iron