1. the electrode material: brass electrode tip - Platinum
2. the electrode pressure: 1.0 ± 0.05N
3. distance between electrode: 4.0mm ± 0.01mm, angle of 60 ° ± 5
4. the electrode voltage: 100 ~ 600V (48 ~ 60HZ) adjustable, short-circuit current in the 1.0 ± 0.1A voltage drop is less than 8%
5. dropping height: 30 ~ 40mm is adjustable
6. dropping size: 44 ~ 55 drops / 1cm3 adjustable
7. dropping time: 30s ± 5s,
8. drip: 0 ~ 9999 times adjustable
9. leakage judge: loop current is greater than 0.5A and maintained for 2 seconds then relay cut off the current , indicating samples failed
10. the testing process: Test program automatic control , independent ventilation
11. the reference standard: IEC60112, GB/T4207, GB4706.1
2. the electrode pressure: 1.0 ± 0.05N
3. distance between electrode: 4.0mm ± 0.01mm, angle of 60 ° ± 5
4. the electrode voltage: 100 ~ 600V (48 ~ 60HZ) adjustable, short-circuit current in the 1.0 ± 0.1A voltage drop is less than 8%
5. dropping height: 30 ~ 40mm is adjustable
6. dropping size: 44 ~ 55 drops / 1cm3 adjustable
7. dropping time: 30s ± 5s,
8. drip: 0 ~ 9999 times adjustable
9. leakage judge: loop current is greater than 0.5A and maintained for 2 seconds then relay cut off the current , indicating samples failed
10. the testing process: Test program automatic control , independent ventilation
11. the reference standard: IEC60112, GB/T4207, GB4706.1
12. the studio volume: not less than 0.5 cubic
13. the device outside dimensions : 1100mm wide × 700mm deep × 1300mm high
14. power supply: 1KW/220VAC/48-60Hz
15. Control: Single-chip microcomputer touchscreen + key dual control system, high-precision thermometer stand-alone electronic control system, anti-interference ability.
16. the operation efficiency: test control process to achieve one -button operation , testing fast and efficient .
17. the test standard integration: the preparation process according to the actual test procedures
13. the device outside dimensions : 1100mm wide × 700mm deep × 1300mm high
14. power supply: 1KW/220VAC/48-60Hz
15. Control: Single-chip microcomputer touchscreen + key dual control system, high-precision thermometer stand-alone electronic control system, anti-interference ability.
16. the operation efficiency: test control process to achieve one -button operation , testing fast and efficient .
17. the test standard integration: the preparation process according to the actual test procedures
Tracking tester is on the surface of the solid insulating material, between the required size (2mm × 5mm) platinum electrodes, a voltage is applied and drop every 30s on a height 35mm required volume of conductive liquid droplet (0.1 % NH 4 CL), to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti -leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).
Tracking tester can be used for lighting equipment, low-voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic, electrical connectors, accessories and parts industry.
