Helical Gear Plastic Injection Tool , POM Fan Gate Hot Runner Mold
Quick Detail:
1. The part name: helical gear (plastic injection mold)
2. Plastic material: POM
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Point gate, Sub-gate, direct gate, fan gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: helical gear
Mold type: Plastic Injection Mould with hot runner system
Part Material: POM
Locating ring Dimension: 100
KO Pattern: 200*200
Sprue Radius: SR 19
Ejection type: ejection sleeves.
Mold construction description: hot runner system with point gate, and ejection while rotating
This product is made of POM plastic material and it is one of the components of the reputable brand printer. The construction is complicated and there are many kinds of bearing and Rotating sleeve in the mold, the product need to be ejected while rotating, so it has a very high technical requirement for the mould design. The mould is a hot runner mould with water cooling system and the part can be molded by automatically.
This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B3.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
1.name | helical gear (plastic injection mold) |
Plastic material | POM,GPPS,PP,PE,PA,PC,ABS,PC+ABS,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF, PC+GF,POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
3.mould base material | S50C,P20,S136 etc |
4.cavity material | H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
5.mold life | 1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
6.cavity number | 8 |
7.runner | Hot runner |
8.gate type | Point gate, Sub-gate, direct gate, fan gate, edge gate, valve gate, tip gate etc according to our customers requires. |
9.mould weight | 250 kg |
10. mould base standard | LKM Local standard, DME,HASCO,Customize according to customers' requirements |
11.cycle time | 20 second |
12. standard of mold accessories | <span style=" |
