LTF5550 LED Lightbar for Fire, Police, Emergency Vehicle
1. Summary
This LED Light bar adopts double-layer aluminum alloy boards structure and sector design, which has distinct outline stronger percussion-resistant capability, and is not easy to lose color and get aged. Moreover, the caution light has good sealing and waterproof. A lot of high brightness LED lights are distributed as a ring and give out strong flash from each direction. And it has advantage with high brightness and low power waste. Even in extremely complicated circumstances it can transmit emergency signal correctly.
2. Specifiation:
2. Specifiation:
Work voltage | DC12V/DC24V |
The max. lightened bound | > 800LX |
Environment | -40 ℃~ +50 ℃ |
Waste currant | <=18A |
Left alley light | 23W halogen |
Right alley light | 23W halogen |
Front lights | 23W*2PCS halogen |
Direction lights | 5.4W*6PCS LED |
Main flash lights | 5.4W*16PCS LED, 4 kinds flash modes |
Total power | 210W |
Light type | LEDS |
Material | Aluminum alloy board |
Size | 1180x314x117(165)mm |
Net Weight | 22KGS |
3. Explanation
1). Installation of the warning light bar
a) Put light bar on the back of the vehicle, base on the vehicle's size, adjusting the frame to fit it, And Then making the catch button the rainwater line on both side of the bodywork and screwing the nut by wrench. (Re. Figure 2 below)
b). After installed, firstly, the two main electrical wires should be connected with auto's storage battery (red to +, black to -), secondly firm plug the controller to the light bar..
c). After checking, then turn on the switch of controller, and choose the flash mode, the light will beginning to work.
2). Controller
The switch LEFT ALLEY control the left alley light. The switch RIGHT ALLEY control the right alley light. The switch TAKE DOWN control the front halogen lights. The switch TRAFFIC ADV control the power supply of the direction lights. The switch FLASHING LIGHTS control the main LED lights. the switch LEFT FORWARD RIGHT choose the director flash in three mode (on LEFT means turn left, on FORWARD means drive ahead, on RIGHT means turn the right. ).
Figure 1 switch controller
Figure 2. INSTALLATION OF THE LIGHT BAR
Figure 3. WIRE CONNECT OF LIGHTBAR CONTROLLER AND BATTERY
3). Note
If the light was no working, please check the main fuse on the controller.
Workshop:
Applications:
Police, Fire, The Automotive, Police, Fire, Motorcycle, Construction,Emergency Vehicle and School Bus Industries
Workshop:
Applications:
Police, Fire, The Automotive, Police, Fire, Motorcycle, Construction,Emergency Vehicle and School Bus Industries
