NOn-mag material 9"~9-1/4"API KW-11" DRILL STABILIZER HF5000
Material: Non-mag material
Type:finished stabilizers / roughmachined stabilizer forgings
OD of Bits:6"-36"(finished), 42"(forgings)
Hardfacing for IBS: HF1000~HF5000
Inspection:TPI is available
Hard-facingTypes
HF 1000 (crushed carbide)
HF 2000 (crushed carbide and tungstentraps)
HF 3000 (T.C.I. spray matrix spray powderand tungsten insert)
HF 4000 (buttons)
HF 5000 (technodur)
OptionsAvailable
Integral blade
Welded blade
Alloy steel
Non-magnetic steel
Technical Specifications of Spherical Stabilizer
| working O.D. (in) | Body O.D. on Both Ends (mm) | I.D. (mm) | Stabilizer Length (mm) | Thread on Both Stabilizer Ends | |||
| String Type | Near Bit Type | ||||||
| Top | Down | Top | Down | ||||
| 6~6-1/2 | 121 | 51 | 785 | 3-1/2IF | 3-1/2IF | 3-1/2IF | 3-1/2REG |
| 7~7-7/8 | 159 | 57 | 850 | 4-1/2IF | 4-1/2IF | 4-1/2IF | 4-1/2REG |
| 8~8-1/2 | 165 | 71 | 850 | 4-1/2IF | 4-1/2IF | 4-1/2IF | 4-1/2REG |
| 9~9-1/4 | 197 | 71 | 870 | 4-1/2IF | 4-1/2IF | 4-1/2IF | 4-1/2REG |
| 12~12-1/4 | 203 | 76 | 940 | 6-5/8REG | 6-5/8REG | 6-5/8REG | 6-5/8REG |
Our facilities in worshop: 
Warrenty:
We, Kingwell will strictly fulfill all the clauses according to contract, delivery on time and assure quality. For Quality, we assure as below:
If problems occurred during the operation, Kingwell shall write a specific reply for the question within 6 hours after seeing the email (facsimile) and show a solution to solve the malfunction within 24 hours.
Remark: The above mentioned ALL PRODUCTS are means except the easily worn spare parts and tools damage caused by human operation error.
Kindly let me know if you have any interest or enquiry about ourproducts. You are also always welcomed to come to our factory for a visit at your convinent time.
We will offer you a good price and show you our best service.
