First: Material of 400w LED High Bay Light
This brand new super conduction aluminum housing is a Vapor chamber with heat sink fins on the surface, also is a heat sink with vapor chamber studded inside. It perfectly combined the vapor chamber technology together with the traditional heat sink housing.
The Temperature equilibrium cavity of this new housing is consisted of the heat sink's baseboard, heat plate, infused vacuum purification liquid, and the cavity's inner structure.
The Liquid evaporating at the heat source inside the cavity, then diffuse in the whole space of the cavity, and congealed on the inner surface of the cavity, finally, the congealed liquid will flow back
To the heat source by the structure of the cavity and evaporating again. This designed system greatly improves the heat dissipation efficiency.
Second: Applications of 400W led high bay light
Widely used in the factory workshop, storage, toll station, gas station, supermarket, exhibition center, and other places.
Third: Features of LED high bay light 400w
1.This new super conduction heat sink housing has much better thermal conductivity factor, heat dissipation efficiency, and also with smaller valume, lighter weight. Adopt Bridgelux LED lighting source, which has super brightness, high thermal conductivity, the best heat-resistant quality, low lumens depreciation, and with pure lighting color, stable high quality lighting output..
2.Environmental friendly and energy saving, dustproof, no IR or UV radiation, Lead and Mercury free.
3.High color rendering index, truely showing the color of the objects. Many different colors are available, such as red, blue, green, warm white, nature white, cool white etc., which can meet different
lighting requirements, bring much more comfort lighting atmosphere, helps to improve the working
Efficiency.
4.With constant current and constant voltage, suitable for AC90-305V input, and avoid the noise, flickering caused by the ballast, making your eyes feel much more comfort, and not easily being tired.
5.With special surface treatment, beautiful appearance, easy to install and dismantle, making this light widely adopted for both lighting and decoration.
Fourth: Specification of 400w LED high bay light
Input Voltage | AC90V-305V | |
Current Frequency | 50HZ-60HZ | |
LED Light Source | Bridgelux | |
LED Consumption | 400W | |
System Consumption | 445 W | |
Led Luminous Efficiency | 100-110lm /W | |
LED Initial Flux | 38420 Lm | |
lamp's Efficiency | ＞85% | |
Illuminance Uniformity | ＞0.8 | |
Color Temperature | 2700K-7000K | |
Color Rendering Index | Ra＞75 | |
Light Distribution | symmetrical/Rectangle | |
Light Design | LED+ lens second light | |
LED Junction Temperature | ≤55℃ | |
Working Temperature | -40℃ ～ 55℃ | |
Storage Temperature | - 40℃ ～ +55℃(25℃ is better) | |
IP Grade | IP54 | |
Net weight | 13.5KG | |
Working Life-span | 50000H | |
Power line | 0.75mm2 | |
Connect Wire | Brown | L |
Blue | N | |
Yellow +Green | G | |
Certificate | CE , ROHS,PSE | |
The color of the lamp shell | silvery white | |
Maintaining introduction:
1.Before operating, please confirm the electricity is disconnected.
2.Regularly clean the lens, keeping the lamp with good light transmission.
3.Regularly clear the housing, keeping the lamp with good heat dissipation.
4.Avoid using water or strong corrosion liquid to do the cleaning. Better to use the dry dishcloth
5.When need to change the driver, firstly open the cover on the back of the housing with a screw driver, then replace the old driver with a new one.
Attentions here: how to connect the wire:
On the AC side:
The Red line connect to the "L" on the driver, and the Blue line connect to the "N", the yellow green line or yellow line connect to the ground wire---
On the DC side:
The Red line connect to the positive pole, the black line connect to the negative pole.
Please note that do not connect it wrong, otherwise, the driver will explode or not work.
