C-Type Hydrostatic Press For Metal Scrap Stamping / Deep Drawing
Quick Detail:
- Hydraulic straightening and stamping press machine
- C type single column structure press machine
- Cold or heat hydraulic oil press machine
- Adopt hands operation and foot pedal
- Apply to industry of machine tool, axle, bearing and etc.
- Equip Mitsubishi PLC and CNC control system.
- Hydraulic press model are 4 ton,6.3 ton,10 ton, 40 ton,63 ton,100 ton,160 ton, 200 ton, 250 ton.
Description:
- The machine body is welded by steel plates with the characteristics of high sensitive of direction-changing, non-contact or non-vacant stroke, and of accuracy being calibrated to 0.02mm.
- It is specially suitable for the calibration of rollers of textile, axles and link levels of automobiles and motorcycles, steel, channels, round bars, angle steels etc.
- It is suitable for the straightening of shaft components and axle sleeve parts as well as the movements of coining and overprinting.
- It mainly applies to the straightening of screw, rack, circular shaft, circular tube, strip steel plate, I-shaped steel, C type steel and welded circular tube as well as the straightening of deformed parts after heat treatment.
- And the pressure, stroke, and speed of axle, motor axle, crankshaft, connecting rod, torsion bar and transmission shaft can be regulated, controlled with easy operating.
- The worker steps on the switch to operate and this equipment straightens and tests with human assistance.
- The accuracy of straightening is between 0.05mm and 0.1mm.
Applications:
This series of hydraulic stretcher is specially used for calibrating and press-fitting of the parts of axial and axial sleeve varieties, and for shaping, punching and embossing of relative components.
Specifications:
Type |
Unit |
200T |
|
Nominal Force |
KN |
2000 |
|
The maximum working pressure of the fluid |
MPa |
25 |
|
The maximum distance between the under surface of the slipper and the surface of the working platform |
mm |
500 |
|
Shaft Speed |
Down |
mm/s |
19 |
Return |
mm/s |
80 |
|
The maximum stroke of the shaft |
mm |
500 |
|
Throat depth |
mm |
380 |
|
Table Size |
FB |
mm |
600 |
LR |
mm |
2000 |
|
The height of the working platform to the surface of the floor |
mm |
1000 |
|
Power of |