Desktop Temperature and humidity chamber
Desktop Humidity Chamber
Purpose : Test a variety of materials , heat, cold resistance, dry and wet performance . Suitable for electronics, electrical appliances , food , vehicles, metals, chemicals , building materials factory use.
Control and features :
Balance thermostat humidity control system (BTH), to PID control SSR, the heated humidification system is equal to the amount of heat and moisture loss , it can use long-term stability .
Technical parameters:
Studio Size : 40*40*50cm
Or upon request made , walk-in room temperature and humidity up to 100 cubic meters.
Temperature range : -40 ~ 150 celsius degree
Humidity :30-98 percentR.H
Temperature fluctuation : about 0.5 celsius degree
Temperature uniformity : about 2 celsius degree
Heating rate :bigger than3 celsius degree / min cooling rate :bigger than1 celsius degree / min speeds up to 5 celsius degree / min
Humidity fluctuation : about 0.5 percent R.H
Humidity Uniformity : about 2 percent R.H
Configuration:
Within the box material : SUS # 304 stainless steel mirror
Carton Material : SUS # 304 stainless steel or steel rippled surface spray treatment
The stainless steel cabinets with a height-adjustable shelving ; bottom of the fuselage installation activities universal polyurethane wheels or adjustable foot cups water level height ; automatic water pump ; two vacuum glass window to increase , electric automatic addition frost
Safety devices : air burning heating protection switch , compressor overpressure protection switch, compressor overload current protection switch , phase protection switch, Circuit Breaker , tank water protection switch, heated humidification fast Insurance
Meet the standards : GB2423.1-89 cryogenic test method , GB2423.2-89 high-temperature test methods , GB2423-93 test D6 alternating hot and humid test method , IEC68-2-30 test method .
Certificate of these machines:
China official 3rd party calibration report
CE certiification
For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK
Our Main Products:
1) temperature humidity chamber
2) temperature fast change chamber (ESS chamber)
3) thermal shock chamber
4) temperture humidity combined salt spray chamber
5) temperture humidity combined vibration chamber
6) pressure accelerated aging chamber (PCT&HAST chamber)
7) high temperature aging chamber
8) sand and dust tester
9) rain/water spray chamber
10) salt spray chamber
11) UV climate resistant chamber
12) high temperature chamber/muffle furnace
13) vacuum oven
14) high frequency vibration tester
15) mechanical shock and impact tester
16) acceleration mechanical shock tester
