HDMI Extender over single CAT5E/6
120M
1.0
Introduction
HDMI Extender
is based on TCP/IP standard. It extends your HD display with the high
resolutions up to 395 feet (120 meters) away from your HDMI or DVI-D source by
using one CAT5e/6 cable. HDMI Extender support 3 transmission mode,
point-to-point mode, one point-to-many mode and cascade connection. HDMI
Extender Built-in IR extender function allows IR remote control of Source
devices from remote viewing location by sending IR commands received in the
vicinity of the Display back to the Source devices.
2.0 Specifications
1.Following TCP/IP standard.
2.Support HDMI1.3 protocol.
3.HDCP1.1 & 1.2 protocol compliant
4.Support point-to-point mode, one point-to-many mode
and cascade connection mode.
5.Support IR extender function allows IR remote
control of Source devices from remote viewing location by sending IR commands
received in the vicinity of the Display back to the Source
devices.
HDTV Resolutions
:
640X480
@ 60fps 800X600 @ 60fps 1024X600 @ 60fps
1024X768 @ 60fps 1152X864 @
60fps 1280X600 @ 60fps
1280X720 @ 60fps 1280X768 @
60fps 1280X800 @ 60fps
1280X960 @ 60fps 1280X1024 @
60fps 1440X1050 @ 60fps
1440X900 @ 60fps 1600x900 @
60fps 1660X1200 @ 60fps
1680x1050 @ 60fps 1920X1080
@ 60fps 1920 x1200 @ 60fps
Audio: Sample rateÖ 32kHz, 44.1kHz and
48kHz 38KHz;
Inferred remote control :
NEC
HDMI
Extender
HDMI: HDMI
1.3
HDCP: HDCP 1.2
Power adapter: Input: 100V - 240V (50 -
60Hz)
Output:
5V/1A
Power consumption: HDMI
TX: 3W
HDMI RX: 3W
Size(L-W-H):
100×60×25mm
Weight :
70g
Operating:
Temperature/Humidity 0 - 70 / 10% - 80%RH(no
condensation)
Storage
Temperature/Humidity -10 - 80 / 5% -90% RH(no condensation)
4.0 Connection and operation
1) Connect the HDMI
source (such as DVD, PS3, STB ) to the HDMI INPUT of Sender.
2) Connect the IR
sender to the Sender IR OUT Port, and Be Directed at HDMI video source's IR
receiver.
3) Connect the HDMI
out of Receiver to HDTV display.
4) Connect the IR
receiver to the Receiver IR INPUT Port.
5) Use one Cat5e/6
cable up to 120m to connect the Sender and Receiver.
6) Plug two pieces of
5V power supply into the Sender and Receiver.
7) Power
on the HDTV display and HDMI source.
