1. Stable Injection Device
● A PID temperature control, precise temperature control of barrel.
● There are three or four screws and barrels with optimal design
Respectively, nitride, hard plating, dual-metal, which is suitable for different processes of a variety of plastics and the choice of product.
● Two-guided direct line guided bar supports, double-balanced rapid injection.
● The high-torque hydraulic motors offer a stable plasticizing capacity, high-precision electronic device position detection enable accurate measurement.
● Multi-injection speed and pressure and multi-level holding pressure settings, switch from the injection time, location, pressure control to ensure the quality of molding.
● Multi-level back-pressure of pre-plastic and pre-speed are computer-controlled, anti-drooling and automated auto purge,
● Expected to prevent cold-start function to ensure that the screw, barrel will not be harmed.
2. Stable And Reliable Clamping Unit
● Five-point double toggle diagonal structure, template design by computer optimization.
● Mechanism, electronic & hydraulic triple interlock safety protection function.
● Sensitive low-voltage mold protection device.
● Multiple hydraulic liftout type
● Multiple stages control for mold opening clamping pressure, speed positioning control
● Hydraulic motor-driving gear mold adjustment.
● Special technique treatment, reliable strength
● Automatic centralized lubrication system
● Mold open and clamping, liftout position control
● Automatic mould adjustment function
● Robotic pincher mechanical installation positioning interface.
● Core pulling and inserting system is suitable for the complicate structure mould.
3. Fast Response, Stable Output
● The manual plug value hydraulic system make the machine having quick and smooth motion response
● Pressure and flow double proportional value control
● Hydraulic oil cooling device
● High-performance imported hydraulic unit with optimizing allocation
● The fuel tank has a big opening hole so can be cleaned easily.
4. Quick Reaction Stability System
● Special control the computer for plastic injection machine use, control and display relatively independent with high reliability.
● Technical parameters pre-setting and storage function
● Parameters information protection function
● Charging barrel temperature deviation automatic adjustment function
● Abnormal alarm function
● Front and back door emergency stop button
● Real-time monitoring can display the condition of each motion
● Electrical motor safety protection device
● Robotic pincher interface
● Cutting photoelectric switch
● System hardware I/O detection function
● Charging barrel temperature is controlled accurately by computer setting and PID closed-loop manner.
● Screen protection function , prolong the life of screen using.
| Machine model | KSML140 | |||
| Specification | A | B | C | |
| INJECTION UNIT | Unit | |||
| Screw diameter | mm | 38 | 42 | 45 |
| Screw L/D ratio | L/D | 24 | 22 | 20.5 |
| Shot volume(therretical) | cm3 | 226 | 277 | 318 |
| Injection weight(ps) | g | 206 | 252 | 289 |
| Injection rate | g/s | 94 | 115 | 132 |
| Injection pressure | MPa | 208 | 171 | 149 |
| Screw speed | rpm | 185 | ||
| CLAMPING UNIT | ||||
| Clamping force | KN | 1400 | ||
| Open stroke | mm | 380 | ||
| Space between tie bars(W×H) | mm | 420×420 | ||
| Max.Mould height | mm | 450 | ||
| Min.Mould height | mm | 160 | ||
| Ejector stroke | mm | 140 | ||
| Ejector force | KN | 50 | ||
| Others | ||||
| Max.pump pressure | MPa | 16 | ||
| Pump motor power | KW | 13 | ||
| Heating power | KW | 8 | ||
| Numbers of heating area | segment | 3+1 | ||
| Machine dimension(L×W×H) | m | 4.6×1.5×2.1 | ||
| Oiltank cubage | L | 235 | ||
| Machine weight | t | 4 | ||
| Standard Features | ||||
| Double-cylinder balance injection system | ||||
| Multi-stage pressure&speed injection | ||||
| Back pressure adjustment device | ||||
| Low pressure mold protevtion | ||||
| Multipe hydraulic ejector knock-out | ||||
| Mechanical electrical safety device | ||||
| Auto lubrication system | ||||
| Hydraulic pressure full proportional control | ||||
| Computer control system | ||||
| Molding data memory system | ||||
| Oil temperature controller | ||||
| Hopper magner | ||||
| Optional Features | ||||
| Double hydraulic pulling and inserting | ||||
| Air blowDV | ||||
| Hydraulic unscrew device | ||||
| Hydraulic safety device | ||||
| High speed clamping | ||||
| Linear guide | ||||
| Standard Accessory | ||||
| Anti-vibrating pad | ||||
| Spare parts kit | ||||
| Tool box | ||||
| Iubrication oil | ||||
| Optional Accessory | ||||
| Robotic pincher | ||||
| Hopper dryer | ||||
| Auto loader | ||||
| Mold clamps | ||||
| Water chiller | ||||
| Plastic dehumidizer | ||||
| Mold temperature controller | ||||
| Oilbypass filter | ||||
| Plastic granulator | ||||
| Plastic color-mixer | ||||
| Inverter |
