600Lb Casting Floating Ball Valve With Worm Gear For Water Conservancy DN25-DN100
Quick Detail:
Size & Pressure : 150# DN25-DN250
300# DN25-DN250
600# DN25-DN100
Description:
CAST FLOATING BALL VALVE
1.Bow-out proof stem
For the purpose of preventing the stem from flying off resulting in abnormal rising of the inner
pressure of valve,shoulder is fixed at the lower part of the stem.In addition,in order to prevent
leakage resulting from burnout of packing set of the stem in a fire,thrust bearing is set at the
contact position of the shoulder at lower part of the stem and valve body.Thus an inverse seal
seat is formed which will prevent leakage and avoid accident.
2.Key lock
Locks can be used to lock the manual valve when it is fully open or closed so as to prevent
non-working personnel from pulling the handle which may result in misoperation of valve.It
can also avoid opening or closing of valve resulting from the shock from pipelines or unpredictable
factors that may cause an accident.For working pipelines such as combustible and explosive oil,
gas and chemical medium,or for field piping site,the locking mechanism is especially useful.
3.Anti-fire safe design
When the trunnion ball valve be used normally,its sealed by seat and ball surface,seat retainer
sealed by O-ring and body,this is soft sealed and reliable sealing.When the seat and O-ring are
burnt,the seat retainer and body will be sealed by expanded graphite.Thus act anti-fire safe purpose.
4.Anti-static device
In order to prevent friction among ball,stem and PTFE that generates static electricity which may
light the combustibles and explosives that cause an accident,in this ball valve,static-conduction
spring is set between the stem and the ball,the stem and the body.Thus static electricity is conducted
to ground and system safety is secured.
5.Low torque in operation
The self-lubricated bearings are installed at the friction of stem,resulting in wear resistance,fiexibility
of operation and low torque.
6.Automatic body cavity relief
When the body pressure going up un-normally as the unstable factor,the trunnion ball valve
downstream seat will be pushed by un-normally pressure,and the release the un-normally pressure
automatically,it doesnt damage to the sealing of upstream seat.The unnormalpressure which in
the floating ball valve body will release the pressure into the upstream pipe directly,it doesn't
damage to the sealing of the downstream seat.
7.Various driving types
The top pad of valve designed according to ISO 5211,which is convenient for connection and
exchange of various drivers.The common driving types are manual,electrical,pneumatic and
pneumatic/hydraulic.
Applications:
large and medium oil, gas, water conservancy, pharmaceuticals,Chemical, heating equipment industry
