Punching Line Wallboard Plate Steel Roll Forming Machine With Mechanical Step Feeding
.Craft Flow
Uncoiler —— Leveler —— Step Punching —— Damp —— Receiving Machine —— Control System
II. Equipment Units and Main Parameters of Single Unit
1. Uncoiler
It adopts a single-arm inner inflation type of uncoiler with manual inflation.
The bearing weight is 5T and the hanging width is Φ600mm. The inside diameter of the steel coil is Φ520mm-Φ620mm.
2. Leveler:
It adopts wallboard plate type. 2-roller for clamping & 5-roller for leveler.
The diameter of the leveler roller is φ 80 with the material of 40Cr and quenching rigidity of HRC48°-52°.
Chrome coated in the surface. Motor power is 5.5KW. Frequency control. Cycloidal pin gear reducer.
3. Step Forming Machine
It adopts a mechanical step feeding device. Feeding step length: 12mm. Adopts high speed punching machine.
Punching hole speed: 200-300times/min. Speed of the punching line; 2.4-3.6m/min. Punching power: 7.5kw.
Frequency control. 1 set of forming die with the material of Cr12Mov and quenching rigidity of HRC58°-60°.
1 set of spare punching head.
4. Damp:
Equipped with a hold down device and damp tension.
5. Receiving Machine:
It adopts a single-arm inner inflation type of receiving machine with manual inflation. The bearing weight is 5T .
The inside diameter of the steel coil is Φ520mm-Φ620mm. Power: 7.5kw. Frequency control. Cycloidal pin gear reducer. The ratio is: 120
6. Control System:
A PLC programme control system is adopted in the production line.
The harmonized movement of each part of the production line can be controlled both manually or automatically.
7. Others:
Total power: 20.5KW. Working voltage: 380V, 50Hz.
Oversize: 20000mm x 2000mm x 1500mm (L x W x H).
