Introduction:
Jigging machine of 2LTC-6109/8T is widely used in mineral dressing or beneficiation system for kinds of ores like hematite, limonite, sand gold ore, manganese ore, tungsten ore, tin ore, Ta-Nb mineral, mercury ore, fluorite ore, barite ore, the azure quarries and so on. It can be also used to recovery metals or alloy particles from kinds of smelting slag like silica-manganese slag, ferro-manganese slag, nickel slag, steel iron slag, sulfate slag.
Working principle:
2LTC-6109/8T jigger is kind of side-moving rectangle jigger with two rows and four chambers. Motor drives reduction gears moving by the transmission. There are eccentric adjusting devices at both output ends of the reduction gears. The eccentric adjusting device drive the connecting rod after adjusting to drive the driving pan to do the alternation motion extruding the liquid in the cell body and promoting waves. The waving water moves through the screen to impact the ore on the screen making the ore in the state of free-failing body in the liquid. The ore grains own different dropping speed in the liquid because of the different density, so the ore will separate naturally. Finally, the heavier ore will be discharged out of the cell body after the adjustment and the lighter ore floats the waste-discharging mouth to be discharged and the whole ore beneficiation process is finished.
Model | Section | Column | Jigging | Jigging | Stroke | Stroke | Stroke | Handling | Power | |
2LTC6109/8T | Trapezoid | 2 | 8 | 5.76 | 0.52-0.35 | 0-50 | 120-300 | 20-30 | 1.5*4 |
Iron ore dressing plant
There are magnetic iron ore like magnetite and weak magnetic iron ore like liminite, hematite, specularite, and for these two kinds of different iron ore, different upgrading way will be involved. For manganetic iron ore, magnetic separation is prior to be considered to get the high grade iron concentrate. But if magnetic separation is still used for the weak magnetic iron beneficiation, a large plant investment will be needed because it needs strong intensity magnetic separator to work. However, here gravity separation can also work for the weak magnetic iron ore. So when the gravity separation can be used? Firstly, the inlay size of iron granules shall be coarse with clear bounds with the other gangue, and crushing can dissociate the iron grain from the raw gangue. Second, there shall be density difference between the iron granules and the other inlayed gangue. On both conditions, the iron ore can be upgrading by gravity separation machine. Here the iron jig machine has been introduced as the ideal separation gravity separation for weak magnetic iron ore. Test can be done if samples about 15kg can be available.
