As we all know that drilling fluids are used in the drilling process to keep the drill bit cool & carry the down hole drilling cuttings up to the surface of the well. To maintain the specified viscosity and density of the drilling fluids, some drilling fluids agents such as barite, bentonite, etc. must be added into the fluids in the drilling process. Previously centrifuge are used to add these fluids agents into the drilling fluids, but now mud mixer or some called mud hopper are used specially to complete the adding processing in the solids control system.
www.kosun.com
Jet mud mixer is composed of single mixer & double mixer. The electrical motor drives the drilling fluids flowing in the pipeline, and fluids agents are added through the hopper into the drilling fluids. It enhances the shearing rate to the fluids agents, and reduce the viscosity time of the drilling fluids. KOSUN series mud mixer is used to make and mix drilling fluid to change the density and viscosity. This device can satisfy the fluid weighting and mixing of solids control system for 1500m-9000m drilling.
Below is the illustration of mud hopper. The design of mud hopper is with venturi & jet. When the drilling fluids flow through the jet, the pressure of venturi would be lower than the standard air pressure, so the drilling fluids agents in the hopper would enter into the venturi automatically, and dissolve into the fluids with the fluids flowing.
http://www.solid-control-system.com
Technical Features: 1. Can be worked for mud preparation, adjusting mud density, viscosity, acid-base property 2. Can reach the request for the mud density adjusting and preparation for the drilling solid control system of 1500-9000m 3. Getting a better mud disposal 4. Increasing jet force of the mud 5. Promoting sufficient circulation and mix for the mud.
KOSUN is one of the professional solids control equipment manufacturers, not only specialize in designing & manufacturing mud mixer, but also shale shaker, mud cleaner, centrifuge, mud agitator, etc.
