Product name:8mm thickness 24W 1x2ft led anel light(3 steps dimming)
Model:ZS-CP-01
8mm thickness 24W 1x2ft led panel light(3steps dimming)
Led chip: SMD2835
thickness: 8mm
CRI: over 80Ra
Warranty: 5 years
Installation method: 1) Embedded; 2) Hanging; 3) Ceiling surface
Back view:
back view of 24W 1x2ft steps dimming led panel light
Features:
1) Driver: Isolated with constant current output, Rubycon capacitors from Japan, built-in 2 PFC(PFC+PWM) circuit to realize better stability and completely avoid flickering.(PFC=power factor correction)
2) Installation method: 1) Embedded; 2) Hanging; 3) Ceiling surface
3) Dimmable option: 1) Step dimming by push switch at 10%, 40%, 100%, 2)0-10V dimming system
4) Imported Material: Aluminum Alloy + PMMA
5) Color Rendering Index: CRI over 80Ra
6) Power factor: over 0.95
7) Beam way: two sides light emitting
8) LED Chips: SMD3528 from Epistar
Technical Parameters
Size | LED Power | System power | LED qty | Qty for series connection and parallel connection | Driving current | Flux (±10%) | Luminous Efficiency | Lux at 2Meters (±10%) | Net Weight | ||
A | B | C | |||||||||
300 | 300 | 8 | 16W | 18W | 88 | 11S 4P*2 | 58mA | 1300lm | 75Lm/W | 90lx | 0.88Kg |
300 | 600 | 8 | 20W | 24W | 180 | 10S 9P*2 | 36mA | 1900lm | 80Lm/W | 105lx | 1.72Kg |
300 | 1200 | 8 | 40W | 40W | 200 | 10S 5P*4 | 56mA | 3200lm | 80Lm/W | 240lx | 3.22Kg |
600 | 600 | 8 | 40W | 40W | 180 | 10S 9P*2 | 56mA | 3300lm | 80Lm/W | 210lx | 3.18Kg |
Input voltage: AC100-240V
Working voltage: 28-36V
Working Temperature: -10 to +40Celsius degree
IP rate: IP41
Color Rendering Index(CRI): Ra>80
Color Temperature(CCT): 2900-6500K
Lighting Angle: 120°
Power factor: PF>0.9
Installation steps:for hanging type
hanging type installlation of steps dimming led panel
Installation steps: for hanging type
Step 1: punch 2 holes in the ceiling.
Step 2: punch the 'Plug'in
to holes.
Step 3: lock-in the base to plug hole with 'self tapping screw'
Step 4: screw the fast connect into the base.
Step 5: fix the base on the ceiling surface.
Step 6: fix the base main part and base plate with screws.
Step 7: draw the "input power wire" from wire entry then connect with terminal.
Step 8: installation finished.
Note:
1. rip off the pellicle after you finish the installation, to ensure no dust inside LED panel.
2. firstly, Debugging the LED panel after installation, then power on.
3. only fixation and maintenance by professional person.
Other installation mothod:
suspending installation of this square led panel light fitting:
ceiling surface installation of this square led panel light fixture
embedded installation of 8mm thickness dimmable led panel light fitting
Packing:
Product size | Inner box size | Carton size | G.W(±5%) | Q`ty/Carton |
300x300mm | 360x43x360mm | 380x240x380mm | 7.0Kg | 5pcs |
300x600mm | 660x43x360mm | 680x240x380mm | 11.5Kg | 5pcs |
300x1200mm | 1260x43x360mm | 1280x240x380mm | 18.3Kg | 5pcs |
600x600mm | 660x43x660mm | 680x240x680mm | 18.9Kg | 5pcs |
Packing of dimmable square led panel light fitting
Note:
1. when installation, try to avoid the minefields, strong magnetic field and high-voltage area.
2. ensure a solid connection correctly in order to avoid short-circuit damage to components and trigger fires.
3. installed in a well-ventilated place to ensure appropriate environmental temperature.
4. please check local voltage in accordance with the product requirements before using the product.
5. to prohibit the live wiring, check to confirm the wiring correct, confirm no short-circuit and then power on.
6. in case of failures, do not maintain it in private.
Application:
Application of dimmable square led panel light fitting
