1X8 4Kx2K HDMI Splitter with Audio Extractor
Introduction
This range of high performance HDMI splitters provide one HDMI in to two, four or eight HDMI outputs
and supports 4K×2K, 3D, 12-bit Deep Color as well as High Definition Lossless Audio. With its
3Gbps bandwidth and the additional features of the latest HDMI standards you can be sure of great HDMI distribution.
The splitter allows you to extract audio signals from your HDMI source. you can take your original HDMI audio signal and convert it to digital optical or analog stereo audio.
Feature
Compliant with HDMI1.4, HDCP 1.2 and DVI 1.0
Supports HDMI audio sampling rate up to 192 kHz
Supports Optical S/PDIF audio sampling rate up to 192 kHz
Supports TMDS clock frequency rate 300 MHz
Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
Supports 3.5mm phone cfor analog stereo audio output
Supports built-in EDID control
Supports 4K×2K resolution and 3D signal
Package Contents
HDMI Splitter 1pcs
12V/2A DC power adaptor 1pcs
Operation Manual 1pcs
HDMI IR adaptor (optional) 1pcs
Wideband IR Tx/Rx (optional) 1pcs
Specification
Video Bandwidth 300MHz/10.2 Gbps
Input Ports 1 × HDMI (Female type)
Output Ports 8 x HDMI (Female type),1xOptical,1x3.5mm phone
Output Resolution 480i ~1080p50/60, 4Kx2K@24/30, VGA~UXGA
HDMI Cable In 1080p/12bits (15m)
HDMI Cable Out 1080p/12bits (15m)
ESD Protection Human Body model: ±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 12 V/2.5A DC
Dimensions 118 mm(W) x 250mm(D) x 32mm(H)
Weight 720g
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0 °C~40 °C/ 32 °F~104 °F
Storage Temperature −20 °C ~ 60 °C/−4 °F ~140 °F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 8.3w
Connect and Operate
Connect the signal sources such as Blu-Ray Player, Play Station 3, audio/video receiver, satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Splitter input.
Connect the HDMI outputs from the HDMI Splitter to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection.
The Splitter is powered by an exteal power supply which is included. Connect power first to the source, then to the Splitter and then to each HD TV or projector.
The input source can be controlled from the display. This is accomplished by using an optional IR Receiver pigtail pointing away from the display(s), which can be connected with the optional HDMI IR Adapter, and inserted between the HDMI cable connector and the display with the toggle splitter at the "IR" position. The IR Transmitter pigtail is then connected to the splitter and pointed to the source(s). A remote control is used at the display to select switch inputs and output.
EDID control Table
