Ethernet PoE switch CSMA / CD Access Method And 8 RJ45 Port
Ethernet PoE switch CSMA / CD Access Method And 8 RJ45 Port
Description:
The netis PE6108H Fast Ethernet PoE Switch provides a great selection for expanding your home or office network. 4 of the 8 10/100Mbps RJ45 ports of the switch support Power over Ethernet(PoE) function. It can automatically detect and supply power with the IEEE 802.3af compliant Powered Devices (PDs), like PoE APs, IP Phones,IP cameras, etc.In this case, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets.
Specifications:
|
Hardware |
|
|
Interface |
8 10/100Mbps RJ45 port, including 4 PoE ports (Port 1-Port 4) |
|
LED |
PWR, 1-4 PoE, 1-8 100M |
|
Power Supply |
100-240 V AC/50-60Hz |
|
Dimensions (L x W x H ) |
280 x 173 x 43mm |
|
Switching Features |
|
|
Standard |
IEEE 802.3u 100BASE –TX, IEEE 802.3 10BASE –T, IEEE 802.3af, IEEE 802.3x Flow Control |
|
Access Method |
CSMA/CD |
|
Transmission Method |
Store and Forward |
|
Switching Fabric Capacity |
1.6Gbps |
|
MAC Address Table |
4K, auto-learning & auto-aging |
|
Flow Control |
IEEE 802.3x Flow Control, Full-Duplex mode |
|
PoE |
15.4 Watts (Max. each port) |
|
Others |
|
|
Certification |
FCC, CE |
|
Environment |
Operating Temperature: 0~40 |
|
Package |
1*PE6108H |
Competitive Advantage:
8 10/100Mbps Auto-Negotiation RJ45 ports with PoE function(Port 1-4)
Complies with IEEE 802.3af standards
Supports PoE power up to 15.4W for each PoE port, 62W for all PoE ports
Supports PoE IEEE 802.3af compliant Powered Device (PD)
Supports 4K MAC address table, MAC address auto-learning & auto-aging
Supports IEEE 802.3x flow control for Full-duplex mode, Back-pressure flow control for Half-duplex mode ports
Plug and play, no configuration required
Steel desktop design, with internal power supply
