JXK-603A
Car parking sensor system
BIBIBI...buzzer alarm speaker parking sensor system
Details of JXK 603A
2 sensor probes (diameter:22 mm / the lenth of the line:250mm)
1 mian part box built-in dual cpu for accurate working
1 bibibi buzzer for alarm voice sound
1 power line
1 3M for buzzer fix
1 3M for main part box fix
1 drilling bit for sensor probes installation
drivers always collide when they are parking,especially new drivers.because they can not see bodies near behind their car.at this time ,they need parking sensor system:bibibi buzzer alarm parking sensor system JXK-603A
first you need to choose 2 position for the sensor probes(about 55-70cm height from ground)
drill 2 holes on your car bumper with the drilling bit
take the 2 sensor probes into these 2 holes and connect their lines with the ports on the main part box inside
then take the plug of the bibibi buzzer into the port on the main part box
the same,choose a best position for the buzzer to fix it in your car with the 3M
at last,take the power line into the main part box ,and connect the red line with the positive pole of back-up lamp of your car,and make the black line ground connection
so it's all for installation of all parts
when you take reverse gear,the buzzer parking sensor system would be woke.these 2 sensor probes will sense all bodies back of your car.and will sound alarm voice when the bodies are between 0.3-1.5m far from your car back.you can control car's brake at the right time.
all is keep you safe.
| No Display |
| No Beep swicth |
| BI.BI stage by stage alarm |
| Senor Color & type optional |
| Working Temperature : -40~85℃ |
| Alarm distance : 0.3m ~ 1.5m |
| JXK-603A's Specification | |
| Product Name | car Bibi buzz parking sensor system |
| Type | security product for drivers |
| Material | plastic |
| Use | 12V car use |
| support | car taxi |
| probe number | 2 |
| Rated voltage | 12V |
| Rated current | 10mA ~ 150mA |
| Detection distance | 0.3 ~ 1.5m for rear |
| Ultrasonic frequency | 40KHz |
| Working temperature | -30ºC ~ +80ºC |
| Warning | 80dB |
| Display form | NO |
| Alarm form | bi bi bi…from buzzer |
| personerly OEM service | |
| diameter of sensor probes | 22 mm |
| lenth of the sensor probes | 250 mm |
Feature:
- "BiBi" audible warning buzzer in 3 steps (Dangdang alarm optional)
- Voice alarm (stop.stop.stop optional
- 2 rear sensors for full coverage, 2 ~ 8 sensors available for front & rear detecting
- Heavy rain-proof & all weather design
- High quality and easy to install
- All spare parts are compatible
- Different sensors & colors optional (stick-on & insert-in)
-Sensor sensitivity adjusted with high and low switched,
antihook function for tow bar and spare tire
- Sensor self-testing function after power on
Specification:
- Rated voltage: 12V
- Rated current: 10mA ~ 150mA
- Detection distance: 0.3 ~ 1.5m for rear
- Ultrasonic frequency: 40KHz
- Working temperature: -30ºC ~ +80ºC
- Warning: 80dB
- Buzzer size: diameter 38mm / dimension: 76*50*20mm
- Full-range technical support
all parts of 2 sensor probes bibibi buzzer alarm parking sensor system JXK 603A
the buzzer 2 sensor probes bibibi buzzer alarm parking sensor system JXK 603A
size of the buzzer of 2 sensor probes bibibi buzzer alarm parking sensor system JXK 603A
the main part box of 2 sensor probes bibibi buzzer alarm parking sensor system JXK 603A
dual cpu centre
circuit board of main part of 2 sensor probes bibibi buzzer alarm parking sensor system JXK 603A
B type sensor probe of 2 sensor probes bibibi buzzer alarm parking sensor system JXK 603A
drilling bit of 2 sensor probes bibibi buzzer alarm parking sensor system JXK 603A
