The high performance gauge pressure transmitter model EJA430A can be used to measure liquid, gas,
or steam pressure. It outputs a 4 to 20 mA DC signal corresponding to the measured gauge pressure.
Model EJA430A also features remote setup and monitoring through communications with the BRAIN™
terminal and CENTUM CS™ or XL™ or HART® 275 host.
- Excellent performance and stability
The EJA series uses a silicon resonant sensor formed from monocrystal silicon, a perfect material which has no hysteresis in pressure or temperature changes. The sensor minimizes overpressure, temperature change, and static pressure effects, and thus offers unmatched long-term stability.
- Compact and light-weight design
Half the weight of conventional models thanks to miniaturization of the casing with the amplifier ASIC, pressure cell structure, and flange. The ASIC uses the minimum number of parts and improves the reliability of the amplifier.
- Fieldbus communication capability
Fieldbus is a digital two-way communication system. It is a revolutionary technology for configuring instrumentation control systems and a promising successor to the standard 4 to 20 mA analog communication used in most field instruments today.
- Output:Two wire 4 to 20 mA DC
EJA series offers two types of fieldbus models, FOUNDATION™ fieldbus Low Voltage Mode and PROFIBUS PA devices, which ensure interoperability between Yokogawa and other manufactures. As for software, the EJA series incorporates two AI function blocks that compute differential and static pressures to allow flexible configuration of instrumentation.
Specifications
EJA430A Gauge Pressure Transmitter | |||
A Capsule | B Capsule | ||
Range | -0.1 to 3 MPa | -0.1 to 14 MPa | |
Span | 0.03 to 3 MPa | 0.14 to 14 MPa | |
Accuracy | ±0.065% | ±0.065% | |
Degrees of protection | IP67, NEMA 4X, and JIS C0920 immersion proof | ||
Certificates | FM, CENELEC ATEX, CSA, IECEx | ||
Output | 4 to 20 mA DC or FOUNDATION™ fieldbus or PROFIBUS PA 2-wire system with digital communication | ||
Supply voltage | BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) | ||
Ambient temperature | -40 to 85 deg C (-40 to 185 deg F) (general use type) | ||
Process temperature | -40 to 120 deg C (-40 to 248 deg F) (general use type) | ||
Maximum overpressure | 4.5 MPa (645 psig) | 21 MPa (3000 psig) | |
Mounting | 2-inch pipe mounting | ||
Wetted parts material | Capsule | SUS316L(Diaphragm material is Hastelloy C-276), | |
Cover flange | SUS316, Hastelloy C-276, Monel | ||
Housing | Cast aluminum alloy or SUS316 equivalent stainless steel (optional) | ||
