Specifications
Commercial blender:
The power of 1200 w
Machine design with a lid to keep noise to a minimum
The capacity is 1000 ml
Max.capacity:1000ml
AC110V/220V 50/60HZ 1300W
Packing:
Gift box:27*23.2*46.5(cm)
Carton:49.5*29*48.5(cm)
2pcs/ctn
N.W: 9KGS
G.W: 10KGS
20'container: 850PCS
40'container: 1970PCS
FAQ
Blender Series | Smoothie Series
How to clean and maintenance the jar covers?
The jar cover could be wash with the sponge, to avoid food sticking for a long time and produce adhesion filth.
The condiment lid and the PC jar should only wash with the soft sponge, to avoid damage and cause the atomization.
How to clean and maintenance the inside of PC jars?
Could add warm water around 350c.c. then close the lid. Turn on the motor for 30 seconds and pour the water. Repeat this action for few times.
To remove the oil and sterilize, could soak some lemon with peel and water to eliminate the flavour.
To clean and remove the filth could add some soda water.
To avoid the musty, after washing the PC jars, jar covers and the condiment lid, water should be pour out then use the motor to idling for 15 seconds to keep the blade dry. Then airing all the components.
Before cleaning the main machine, remember to cut the power off and unplug the power cord. Could be wipe by the dry or wet textile. (Do not use gasoline or volatile solvents to clean it.)
What to do when the motor does not work?
Check if the power cord link to the socket.
Check if the master switch which is on the front left lower corner of motor is on. (Does the energy lamp display light in red.)
Does the PC jar fix on the correct place?
Check if the motor is overloaded or the over current load switch is shutdown. (Please unplug the power cord, then turn on the over current load switch at the back left lower corner.)
What to do when the machine suddenly stops or emits strange smell? What to do when the machine sounds different or louder than usual?
1. It is normal if the machine emits some strange smell while begin to use a brand new machine.
2. Check if the ingredient is too big, to hard or freezing things to be blend.
Please cut the ingredient appropriately into 3-5cm to let all the stuff have enough space to be blend.
Freezing ingredient which just left the refrigerator should be separated by hands, avoid use ingredients that is too big.
3. Check the amount of ingredients and its concentration level and ratio. Make sure they are not exceed or could not be loaded by the motor.
Please blend the ingredient separately.
If the concentration and viscosity of the ingredient is too high, please add some liquid to help the machine spin.
4. Does the machine been worked for a while and does not let the motor rest.
Please shutdown the power and unplug the power cord. Let the motor rest for about 15 minutes then could be turn on and work again.
5. Check if the machine blends the ingredient that is not food. (Ex: Spoon, Knife, Fork or Chopsticks)
Please shutdown the power and unplug the power cord. Pour out everything in the PC jar then check if the blade is freely.
If the blade is freely or damage, please contact to our service department as soon as possible.
Loading Zone.
FAQ
Blender Series | Smoothie Series
How to clean and maintenance the jar covers?
The jar cover could be wash with the sponge, to avoid food sticking for a long time and produce adhesion filth.
The condiment lid and the PC jar should only wash with the soft sponge, to avoid damage and cause the atomization.
How to clean and maintenance the inside of PC jars?
Could add warm water around 350c.c. then close the lid. Turn on the motor for 30 seconds and pour the water. Repeat this action for few times.
To remove the oil and sterilize, could soak some lemon with peel and water to eliminate the flavour.
To clean and remove the filth could add some soda water.
To avoid the musty, after washing the PC jars, jar covers and the condiment lid, water should be pour out then use the motor to idling for 15 seconds to keep the blade dry. Then airing all the components.
Before cleaning the main machine, remember to cut the power off and unplug the power cord. Could be wipe by the dry or wet textile. (Do not use gasoline or volatile solvents to clean it.)
What to do when the motor does not work?
Check if the power cord link to the socket.
Check if the master switch which is on the front left lower corner of motor is on. (Does the energy lamp display light in red.)
Does the PC jar fix on the correct place?
Check if the motor is overloaded or the over current load switch is shutdown. (Please unplug the power cord, then turn on the over current load switch at the back left lower corner.)
What to do when the machine suddenly stops or emits strange smell? What to do when the machine sounds different or louder than usual?
1. It is normal if the machine emits some strange smell while begin to use a brand new machine.
2. Check if the ingredient is too big, to hard or freezing things to be blend.
Please cut the ingredient appropriately into 3-5cm to let all the stuff have enough space to be blend.
Freezing ingredient which just left the refrigerator should be separated by hands, avoid use ingredients that is too big.
3. Check the amount of ingredients and its concentration level and ratio. Make sure they are not exceed or could not be loaded by the motor.
Please blend the ingredient separately.
If the concentration and viscosity of the ingredient is too high, please add some liquid to help the machine spin.
4. Does the machine been worked for a while and does not let the motor rest.
Please shutdown the power and unplug the power cord. Let the motor rest for about 15 minutes then could be turn on and work again.
5. Check if the machine blends the ingredient that is not food. (Ex: Spoon, Knife, Fork or Chopsticks)
Please shutdown the power and unplug the power cord. Pour out everything in the PC jar then check if the blade is freely.
If the blade is freely or damage, please contact to our service department as soon as possible.
