Heat pipe vacuum tube technical parameter
Model | Hp58/1800-18 | Hp58/1800-22 |
Size | φ 58*1800mm | |
Installation area | 1444*1450 | 1744*1450 |
Absorber area | 2.29㎡ | 2.80 ㎡ |
Tank material(inner) | Enamel 2.0mm | |
Tank material(outer) | High quality SGCD | |
Rated pressure | 0.7Mpa | |
Material:
Heat pipe material: copper; 14/24mm condenser diameter, 1800mm pipe length.
Insulation material and thinness: polyurethane foam, 50mm
Seal: silicon rubber polymer
Manifold material: aluminum alloy
Tank capacity: 100,150,180,200,250,300 Lite
Advantages:
1. Adopts red copper channel, with great performance of heat exchange
2. Utilize copper heat pipes containing special medium liquid with low boiling point.
3. Work well in all climate, can be function well even in ambient temperature
4. Each heat pipe tube works independent and efficiently and easy to change if necessary.
5. No water flows inside the vacuum tube, no risk of freezing.
Working principle:
1. Solar Absorption: Solar radiation is absorbed by the evacuated vacuum tubes and converted into heat.
2. Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to header.
3. Solar Energy Storage: Water or water mix is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oC / 9-18oF. Throughout the day, the water in the storage tank is gradually heated.
