GT60 thread button rock bit
Product features:
1.These threaded button bits can meet different drilling requirements in all rock formations.
We can offer special designs according to customer's requirements for specific work situation.
2.The button bits can transmit intensive impact energy into the rock with the least loss of energy.
3.We select high-strength structure alloy steel and carbides with best quality to ensure the drill body and alloy body can achieve uniform wear,thus the service life of bits will be increased.
4.High-strength structure alloy steel
Bit Face Shape Selection
1.Drop Center Bit:For high penetration rates in soft to medium hard and fissured rock formatios Low to medium air pressures. Maximum hole deviation control.
2.Concave Face:the all-round application bit face specifically for medium hard and homogenerous rock formations Good hole deviation control and good fIushing capacity
3.Convex Face:For hiigh penetration ratas m soft to medium-hard wlth low to medium air pressures It is the most rasistance to steel wash. and many reduce the load and wear on the gauge buttons. but poor hole deviation control.
4.Double Gauge Face:This kind face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high aii pressures and good resistance to steel wash step gauge bit.
5.Flat Face Bit:This kind of face shape is suitable for hard to very hard and abrasive rock formations in appllications with high air pressure. Good penetration rates an resistance to steel wash.
carbide button shape selection
1.Domed /Round Buttons are usually used as gauge buttons of DTH Bits. suitable for very abrasive and very hard formations.
2.Parabolic Buttons are usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations.
3.Ballistic Buttons are usually used as front buttons of DTH Bits,suitable for medium abrasive and medium hard formations. They can also be used as gauge buttons if the rock is soft.
4.Sharp Buttons are usually used as front buttons of DTH bits for soft formations where fast penetration rates are possible
5.Flat buttons are usually used as protection buttons to reduce Near on rubbing surfaces of DTH Bits.
Technical Data
GT60 | ||||||
GT60 Thread Button Bits | Diam. | Tip Size(mm) | No.of Flushing Holes | Weight(Kg) | ||
mm | Gauge | Front | Side | Front | ||
GT60 Thread Button Bits | 102 | 8×13 | 6×12 | 2 | 8.2 | |
115 | 8×13 | 6×13 | 2 | 10.1 | ||
127 | 8×14 | 7×14 | 2 | 11.3 | ||
152 | 8×18 | 8×16 | 2 | 15.9 | ||
GT60 Thread Button Bits | 102 | 8×13 | 6×12 | 4 | 8.1 | |
115 | 8×13 | 6×13 | 4 | 10.0 | ||
127 | 8×14 | 7×14 | 4 | 11.2 | ||
152 | 8×18 | 8×16 | 4 | 15.8 | ||
GT60 Thread Button Bits | 102 | 8×13 | 6×12 | 2 | 8.5 | |
115 | 8×13 | 6×13 | 2 | 10.4 | ||
127 | 8×14 | 7×14 | 2 | 11.6 | ||
152 | 8×18 | 8×16 | 2 | 15.9 | ||
GT60 Thread Button Bits | 102 | 8×13 | 6×12 | 4 | 8.7 | |
115 | 8×13 | 6×13 | 4 | 10.6 | ||
127 | 8×14 | 7×14 | 4 | 11.8 | ||
152 | 8×18 | 8×16 | 4 | 16.2 | ||
GT60 Thread Button Bits | 102 | 8×13 | 6×12 | 2 | 8.8 | |
115 | 8×13 | 6×13 | 2 | 10.9 | ||
127 | 8×14 | 7×14 | 2 | 11.7 | ||
152 | 8×18 | 8×16 | 2 | 16.6 | ||
GT60 Thread Button Bits | 102 | 8×13 | 6×12 | 4 | 8.7 | |
115 | 8×13 | 6×13 | 4 | 10.6 | ||
127 | 8×14 | 7×14 | 4 | 11.6 | ||
152 | 8×18 | 8×16 | 4 | 16.4 | ||
Product Pictures
The information you may like to know before order:
1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
Based on order quantity, normally it takes 25 days for production.
Only 2 or 3 days if we have stock on your request size.
3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Services:
1. Our sales team will response for your question within 24 hours (Holidays Excluded)
2. Technical Support will be available in any time
3. Free replacement will provide once the failure confirmed caused by our product quality
About Us:
1.Our factory has been specialized in manufacturing drilling tools and spare parts since 1980.
2.We have advanced technology and equipment.
3.Our technician has more than 25 year's professional working experience.
4.Rock drilling tools are exported throughout the world. Main market: Norway, Turkey, USA, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.
Thanks in advance
