RO-02A 2.6KW Cooling Capacity Industrial Air Cooled Water Chiller With Tank And Pump Inside
Industrial chillers are used for controlled cooling of products, mechanisms and factory machinery in a wide range of industries, including plastic injection and blow molding industry. The industrial chillers assist to improve the production efficiency and minimize the rejection ratio of finished products. A chiller will use either a vapor compression or absorption cycle to cool.
Chillers can be either air-cooled or water-cooled. Air-cooled chiller requires less maintenance than water-cooled unit and it dispenses with the need for cooling towers. However, the air-cooled chiller generally consumes approximately 10% more power than a water-cooled unit. It transfers the heat absorbed to surrounding air directly. Water-cooled chiller absorbs heat from process water and transfers it to a separate water source such as a cooling tower, river or pond. A cooling tower is a must if there is no direct discharge source like river or pond. The water could be reused after special treatment to remove the dusts and impurities.There are 10kw-200kw cooling capacity for you choosing. Please kindly contact us for you detail request.
Features:
1.cooling temperature range 5-35 centigrade temperature.
2. High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3.Tube-fin double condensers with excellent heat transfer and rapid cooling.
4. Stainless steel warm-keeping water tank.
5. Overload protection for compressor, pump and blower.
6. Warm-keeping design for all piping to avoid partial convection.
7. Independent temperature controller, anti-freeze protection.
8. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
9. R22 refrigerant to be used for efficient cooling.
Item | Specification / Supplier | |
Cooling capacity | Model | RO-03A |
kw/h | 8 | |
Power input | kw | 3 |
Temp Control Scope () | 15- Normal atmospheric temperature | |
refrigerant control | capillary | |
Refrigeration circle | one | |
refrigerant | R22 | |
Dimension(mm)L×W×H | 1300×750×1400 | |
Compressor | style | Hermetic scroll |
quantity(set) | 1 | |
Condenser | Style | Fin Type |
Air Volume(m3/h) | 3000 | |
Evaporator | Style | Stainless Steel Plate Heat Exchanger |
Cold water flow(m3/h) | 1.2 | |
Pipe size(G) | 3/4" | |
Tank size(L) | 150 | |
Water Pump(kw) | 0.37 | |
Protector Device | 1,Phase protector | |
Unit Weight(kg) | 220 | |
Operating Weight(kg) | 260 | |
Main Parts | ||
Compressor | Sanyo | |
Electronic | LS / Carlo | |
Electromagnetically valve | Emerson | |
Expansion Valve | Emerson | |
Electrical control | Punp | |
To give you our best offer one time,please indicate:
1.What is the cooling capacity you need?
2.Air cooled or water cooled?As you see,water cooled need a separated cooling tower .
3.What is the outlet water/glycol/seawater temp you need?
4.What is the power supply?
5.Do you need water pump,water tank together?
6.Is there any special requirement for the refrigerant?R22,R134A,R407C,R404A or other?
Welcome to contact !
