Model XTM1 250SA three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter,
it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc.
The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21.
It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. This meter has seven digits LCD displays shows the active energy consumption.
It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation,etc.
This meter has already got the patent certificate from China State Intellectual Property Office at present. Patent certificate NO. ZL 2006 3 0107349.1, any other country patent certificate are in assessing.
Function and Features
1.35mm standard DIN rail installation , complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63mm), users can choose any one by themselves.
2.Ten pole width (Modulus 12.5mm), complying with standard J B/T71 21 -1 993.
3.Seven digits display LCD, standard configuration 6+1 digits display(999999.1 kWh). May select 5+2 digits display (Please specified when ordering).
4.Standard configuration one port of pulse output passive (polarity), May select a distant port (no polarity) . And contact with all kind of AMR system conveniently, Comply with standard IEC 62053-31 and DIN 43864.
5.Four LED instructions respectively every power supply state and signal of energy impulse. Automatic detection the direction of the flow of load current. And Instructions on individual LED
6.Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21 .
7.Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use CT
(Product Configuration code is IC) and PT & CT (Product Configuration code is HC) for operation.
8.Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety. (Product Configuration code is JF).
