Specifications
1.Input: 0-5A, 5-10A, 0-10A option
2.Output: 0-5V,0-10V,4-20mA, 0-20mA option
3.RMS measurement and output
Analog Output Power Sensor Three Phase Power Transducer
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal,which is directly proportional to the input signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
Specifications
Inputs: | ||
System input | 0~5V, 0~30V, 0~60V, 0~300V, 0~400V | |
Absorbed power | 0.1VA | |
Output: | ||
Standard nominal outputs | 4~20mA, 0-5V, | |
(others on request) | 0-20mA, | |
5-10V | ||
0-10V | ||
Respones time | <350ms | |
Load Resistance | Current output: 0<Lr<0.6KΩ; Voltage output: Lr>2KΩ | |
Overload: | ||
Current | 2 times continuous,20 times /1s | |
Voltage | 2 times continuous | |
Auxiliary Supply: | ||
DC | 12V/24V/48V | |
AC | 110V, 230/240V AC 20%, 1.5VA | |
Isolation: Galvanic isolation between input, output circuits and auxiliary supply | ||
InsulationResistance | >20MΩ (DC500V) | |
Test voltage | 2KV RMS 50Hz for 1 minute | |
impulse | 4KV 1.2/50µsec waveform | |
Temperature: | ||
Operating | -10~55C | |
Storage | -40~70C, 20 ~ 93%RH ; Noncondensing | |
