Telecrane Wireless Industrial Remote Control , Shock Resistance
• Durable nylon-fiber housing for extra shock resistance..
• Fully programmable relay configuration with maximum 16
relays output per command.
• Operating range up to 100 meters
• Pre-wiring standard cable making installation quick and easy.
• Economic efficiency, ease of operation.
• 3 stages LED battery power indicator.
• Feature acceleration delay time control (smooth moving for
multiple speeds cranes)
A. Detailed Product Description
Radio Remote Controls have become a key element within a modern working context where safety, productivity, freedom of movement has a continuously increasing importance. Industrial radio controllers are consequently for time saving and risk reduction working instruments.
Thanks to the radio controller, the operator stands in the place with the best visibility and lowest operation risk. The wireless technology allows controlling the machine in full autonomy without requiring other operators to support the job with indications.
AN INDUSTRIAL RADIO REMOTE CONTROL DIFFERS FROM COMMON WIRELESS CONTROLLERS IN DESIGN AND MANUFACTURING ASPECTS LIKE:
EXCLUSIVE CONTROL
You will be certain that no other radio device will take over the control of your application thanks to an exclusive communication channel protected by a unique ID code that IMET assigns to each radio remote control.
CONTINUOUS AND SAFE TRANSMISSION
This device operates in continuous transmission between the transmitting and receiving units. The radio link is made of digital communication frames that are monitored by algorithms at the reception. This guarantee an absolute correspondence between the commands sent by the operator and the received commands. When the radio link is too disturbed or interrupted the receiver unit will autonomously turn into Stop mode bringing the machine to a safe status.
INTRINSIC SELF CONTROL
Our Radio controllers are based on designing and manufacturing concepts aiming to guarantee safety and reliability. For example, the CPU features dual microprocessors in cross checking, STOP circuit is made of monitored double safety relays, S-STOP relay is available for the reduction of motion command failure risk, error and failure test are performed at each transmitter and receiver powering.
B. Application
The ranges of applications of our industrial radio remote control system
1. overhead bridge cranes,
2. gantry crane
3. beam launcher
4. monorail hoists,
5. motorized jib cranes o
6. Other pieces of industrial equipment.
C. Design features:
Dimension and Weight:
Name: F24-60 radio remote control set transmitter and receiver
Size L*W*H 220*110*90 mm
Weight 860g exclude battery
receiver
Size L*W*H 290*230*90 mm.
Weight 2200g exclusive cable
Features:
The feature of transmitter:
F24-60 2 rocker with 5 stpes speed+ 6single speed button include start button +1 urgent stop mushroom button+ 1 start button+ 2 switches of two steps speed+2 switches of three steps speed.
Battery 4 pcs 1.5V AA Alkaline.
Battery safety protect it auto power off when power is not enough.
Safety key is used to avoid usage by unauthorized.
The feature of receiver:
Input voltage: AC 24/48/110/220/380V, DC 12/24/48V.
General specification:
Frequency 310.3-331.2 MHz
Frequency control quartz crystal
Output terminal full sealed relay 20A/250V passive switch signal .
Structure glass fiber
Receiving high frequency sensitivity >-110dBm
Transmitting high frequency output power<4dBm
Reaction rate 0.065s.
Protection&nb
