Heavy Duty Dryer Fabric Loom

Technical Parameters:
Applicable Scope of Polyester Monofilament:
　　1,Reed width: 9m
　　2,Warp: Deformed flat polyester 1.06*0.25/0.58*0.38mm, polyester monofilament 0.9mm, warp density
　　　　11-24picks/cm
　　3,Weft: 1.2mm, 0.35-0.9mm. Weft density 6.5-15 picks/cm
　　4,Revolving speed: 36 rev/min
Main Mechanisms:
　　1,Rack: With cast iron box-type structure of main wall panel, the whole machine is combined by several
　　　　groups of split wall panels.
　　2,Driving: Dual-motor coaxial drive, 18.5kw for each, dual pneumatic clutch, main transmission case
　　　　gears made from special materials, optimized gear parameters and drive ratio, increased beating-up
　　　　force.
　　3,Weft Insertion: German servomotor, weft insertion by double rapier, imported rapier head, matched with
　　　　imported weft accumulator for cord thread.
　　4,Shedding: Large blade type side pull dobby at two sides, 16-page heald frame.
　　5,Beating-up: Multi-section split assembled crankshaft four-bar beating-up mechanism, with more extra
　　　　beating-up points.
　　6,Take-up: Electronic active control for take-up of mechanical worm gear reducer can ensure strength
　　　　and precision of weaving while overcoming impulsion during beating-up.
　　7,Warp let-off: Electronic active control for warp let-off of imported reducer, improving rigidity of let-off
　　　　system by double beam and multiple-fulcrum structure.
　　8,Winding: External center take-up or surface take-up. 
　　9,Lubrication System: Combined auto or manual feed of grease lubrication.
　　10,Electrical Control: Computer control for the whole machine is available for free setting of parameters,
　　　　automatic display of faults, and infrared protection system for weaving.