I.Summary
The Distillation Tester is designed and made as per the National Standard GB/T6536 "Test Methods for Distillation Characteristics of Petroleum Products at Barometric Pressure". It is a distillation tester for natural gasoline, vehicle gasoline, aviation gasoline, jet fuels, special boiling point solvent, naphtha, diesel oil, distillate and similar petroleum products.
II. Technical parameters
| Model | GD-6536 Petroleum Products Distillation Tester | |
| Power supply | AC 220 V±10%, 50 Hz | |
| Heating power | 1000 W | |
| Ambient temperature | room temperature~+35 °C | |
| Relative humidity | ≤85% | |
| Distilling Flask diameter | Φ69±1 | |
| inner diameter of bottleneck | Φ17±1 | |
| Solidifying Tube | Φ14×1 | |
| Dimension | 59*48*62cm | |
| Weight | 22kg | |
III Characteristics
(1) The furnace is composed of silicon carbonized furnace base, heating wire of 1000 W, 220V and high temperature resistant silicon carbonized plate. The height of the furnace can be adjusted by the height adjustment knob, and the heating power of the furnace is controlled by the voltage adjustment knob on the control panel.
(2) The movable plates of furnace are made of silicon carbonized materials. The diameter of hole in the plates is Φ38 mm or Φ50 mm.
(3) The water bath is composed of overflow tube, temperature adjustment tube and bath.
The size of the bath is 244×167×176 mm. The bath is made of copper plate H62 of 1.5 mm thickness.
(4) The furnace case is made of cold rolling steel. There is an observation window at the upper section in the front of the furnace case. The furnace case is used for installing furnace and distillation flask. The circuit controlling section is at the lower section of the furnace case.
