High Temp AC Bimetal Disc Thermostat 50 HZ With Temperature Controller Switch
These snap-action devices, with Quick Make/Quick Break action, automatically reset at preset temperature. An electrically isolated bimetal disc is used to either open or close the circuit current.
Minimum Current
50 m A (others on request)
Contact Resistance
≤ 25 m Ω
Dielectric Strength Terminal to Cap
2000 V eff, 50 HZ
Tracking Resistance of Base Material
PTI ≥ 250 V
Applications:
Split-phase motors
Split-phase motors
- Transformers
- Split-phase motors
- Solenoids
- Automotive accessory motors
- Capacitor start motors
- Ballast protection
- ………and more.
Specification
|
|
|
|
Rated voltage and current |
16A/125VAC,10A/250VAC 50HZ/60HZ |
|
Cycles life |
100, 000 cycles |
|
Terminal |
6.35*0.8, 4.8*0.5. |
|
Available Calibration Ranges |
40 up to 180,tolerance ±5(insulation material PPS) |
|
Available Calibration Ranges |
40 up t o 220,tolerance ±5(insulation material 95 ceramics ) |
|
Standard Differential |
up to 40° C below the min. switching temperature limit lowest limit 30° C. Other values on request |
|
Pull strength |
≥80N, no slip off |
|
Dielectric Strength Terminal to Cap |
2000 V eff, 50 HZ |
|
Contact resistance |
≤100 mW |
|
Min. Rate of Temp. Rise |
0,5° C /min |
|
Ambient Temperature Limits |
0° up to 200° |
Competitive Advantage:
|
|
|
Tracking Resistance of Base Material PTI ≥ 250 V |
