Raised Rib conveyor belt manufacturer
confectionery industry conveyor belt food grade material
plastic sprockets for E20 series
Series E20 Raised Rib is a conveyor belt designed to make product transfers by using finger plates. Both the grille-shaped configuration and the 32%
open area make it suitable for applications in which drainage through the belt is required, and/or applications in which a smaller surface of contact is
needed to prevent the product from adhering to the belt.
Belt date
Material of the belt | Material of the rod | Belt strength (kg/m) | Temperature range(°C) | Belt weight(kg/㎡ |
PP | PP | 1000 | 1 TO 104 | 6.05 |
POM | PP | 2150 | 1 to 90 | 9.25 |
Sprockets data
No.of teeth | Diameter pitch | Bore for square shaft |
Hub width | |
mm | in | |||
8 | 52.5 | 20 | 0.75 | 24 |
16 | 102.5 | 40 | 1.50 | 40 |
24 | 153.5 | 40 60 | 1.50 | 40 |
The problem of space is usual in this industry. But with our E93 belt we can stock a several-hour output, while we cool it, in a bit less than 25 square metres.
Sometimes long conveyors with product, during its processing or even already packed, will be required to go over the whole manufacturing area at a height
free of machines and obstacles. In these cases, it will be necessary a modular belt highly resistant, like our E30 belt, which do not require any surveillance
avoiding any stop in the manufacture process.
If the disposition of the product is an essential factor to carry out its packing by means of automatic systems, our C12 belt reduces the transfer diameter
to the minimum, preventing the product from getting misplaced during the transfer or at the end of the line.
Transportation and daily maintenance of plastic conveyor belt
1.During storage, the product must be placed into a roll not folded, turning once during placement should be on a quarterly basis
2.Different type, size layers together using the belt should
3.Type conveyor belt, structure, size, number of layers should be a reasonable choice according to the conditions
4.Feed direction along the direction of the tape should be, in order to reduce the impact on the whereabouts of the tape should be taken when the material
chute, reducing materials falling distance
Conveyor belt in use should note the following
1.Avoid roller is covered with material, resulting in ineffective rotation to prevent leakage of material between the roller and the tape card, pay attention to
the lubrication of moving parts,
2.Avoid starting with a over load
Feature of Plastic modular conveyor belt
Plastic modular conveyor belt using belt injection splicing, and with supporting the drive sprocket, with no deviation drive replacement easier cleaning
characteristics.Plastic mesh belt drive module is stuck in the belt sprocket sprocket grooves are opposite the corresponding drive, so no deviation.Plastic
modular conveyor belt is easier to replace because it is wearing a matching pin assembled, it can be based on partial replacement of damaged parts,
it is unnecessary to replace the whole one , to save a certain amount of expenses.Plastic modular belt is relatively flat and smooth surface, can be
directly rinsed with water and wash with some tools.Plastic materials have arbitrarily chosen to achieve and satisfy the conditions customers, there
are foodgrade plastic belt and high temperature plastic mesh and plastic mesh belt wear and rally.Is a new type of environmentally friendly technology conveyor ideal supplies. Plastic mesh is also called plastic modular belt belt is the introduction of foreign advanced
technology, using molds for injection molding and then stitched together according to customer demand.
Our services
1. Warranty time: 1 year. The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .
2. Payment: T/T , L/C , Western Union or Paypal .
3. Lead time: 5~15 working days, subject to the order quantity.
4. Shipment: by sea, by air,door to door service for samples transportation.
5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .
Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.
