Power: 7.5 - 75 kw
Production Capacity: 2.5 - 36 t/h
Application Range: Industries of slag, sand, construction materials, metallurgy, food, chemical engineering, coal, medicine and minerals.
Processible Materials: Slag, clay, limestone, ardealite, dry-mixed mortar, grain slag, coal slime.
Industrial Drying Machine Introduction:
Industrial drying machine or industrial dryer is commonly used in dressing, metallurgy, construction, road, etc. There are many kinds of industrial dry mining equipments, such as three-cylinder dryer, river sand dryer, rotary dryer, etc. The coal consumption and power consumption of industrial dryer machine is lower 10-15% than that of ordinary industrial dryer, while the productivity is higher 10-15% than that of ordinary industrial dryer.
Industrial dryer is a type of drying machine which is mainly used for drying the materials with a certain humidity and granularity in ore beneficiation, building material, metallurgy, chemistry and other departments. Rotary dryer machine is a commonly used industrial dryer.
Industrial dryer or industrial drying machine is mainly composed of rotary part, lifting board, transmission part, supporting part and seal ring. The industrial dryer machine produced by our company uses new lifting board with many functions of guiding, current sharing and material lifting, and the materials can be comprehensively distributed on the radial sections of the dryer machine and the material curtain is in the thin, average and full state and the materials can fully contact the hot air, thus achieving the aim of making full use of the heat.
Industrial Drying Machine Features:
1. Use multi-modular lifting devices, high thermal efficiency, low coal consumption.
2. Industrial drying equipment is suitable for a variety of furnace, high temperature boiling furnace, grinding powder coal stove and artificial add coal stove.
3. Transmission gear uses changeable pin column gear instead of traditional cast steel wheel to save investment cost and decrease the maintenance cost and time.
4. Industrial drying machine uses centralized control system, to achieve the micro computer monitoring and management of large enterprises.
Industrial Drying Machine Working Principle:
The air sucked by the exhaust fan into the dryer gets heated through the heat exchanger; the wet materials inside the rotary dyer drum are turned over and over to change heat with the hot air. Then the moisture of the fabric is vaporized and ejected out from the dryer, so materials can be dried within a short time.
Technical Datas of Industrial Drying Machine
| Model(m) | Production capacity(T/H) | Main motor | Main reducer | Weight(T) | ||
| Power(KW) | Model | Model | Velocity ratio | |||
| Φ1.2×10m | 2.5 | 7.5 | Y160M-R3 | ZL50-16-I | 13.5 | |
| Φ1.5×12m | 3.3-4.9 | 10 | Y160L-6-B3 | JZQ500-Ⅲ-2F | 18.9 | |
| Φ1.5×15m | 4-6 | 18.5 | Y200L1-6 | JZQ500-Ⅲ-2F | 21 | |
| Φ1.8×12m | 4-6 | 11 | Y160L-6 | ZQ50-16Ⅱ-2 | 16.46 | 22.83 |
| Φ2.2×12m | 7-12 | 18.5 | Y200L7-6 | JZQ650-Ⅲ | 31.5 | 37.6 |
| Φ2.2×14m | 7-12 | 18.5 | Y200L7-6 | JZQ650-Ⅲ | 31.5 | 40 |
| Φ2.2×16m | 12 | 30 | Y225M-6 | JZQ750-Ⅲ | 31.5 | 45 |
| Φ2.4×14m | 12 | 30 | Y250M-6 | JZQ750-Ⅲ | 31.5 | 51 |
| Φ2.4×18m | 10-13 | 37 | Y250M-6 | ZL85-13-I | 27.16 | 54 |
| Φ2.4×20m | 10-14 | 37 | Y250N-6 | ZL85-13-I | 27.16 | 54.14 |
| Φ3×20m | 25 | 55 | Y250M-4 | ZL100-16-I | 41.52 | 78 |
| Φ3×25m | 32-36 | 75 | YR280M-4 | ZL100-16-I | 41.52 | 104.9 |
Related Products
Bentonite Dryer
Fluorite Ore Dryer
Lignite Coal Dryer
Slag Dryer
Rubber Tyred Mobile Crusher
Asbestos Tile Production Line
200,000 t/year full-automatic dry mix mortar plant
Compound Fertilizer Production Line
