900mah 3ml Double Tastes Variable Voltage E Cig With Power Bank , 3v - 6v
Quick Detail:
Double Tastes Atomizer:
- Can use two kinds of eLiquid, total 6ml,3 ml each
- Three kinds of taste: A,B,A+B
- Easy to choose the taste you want.
- The core is replaceable, ECO friendly.
-
Can use ce5+ core and ce8+ core; ce8+ core can produce big amount of vapor, three times
of the ordinary atomizer - Removable atomizer core easy and don't worry dirty your hand. the atomizer head is clean.
-
Atomizer Stainless Steel Accessories (expect the core);The atomizer can be reused, greatly
reduce the cost - The air flow rate is adjustable, you can set up the force as you want.
- 510 drip tip, several styles available.
- Universal Atomizer,can be used in almost all the e-cigarette batteries. Such As : 510-T,EGO-T,EGO-V,EGO-K,EGO-G,EGO-N,EGO-TWIST,EGO-VV,EGO-LCD,EGO-L,VMAX,ZMAX,PBVMAX,PBVMAX-P,VMAX-P and so on.
Function of PBVmax
- Built-in three digit display allows you to visually adjust your voltage
- Electronic cigar Output Voltage: Adjustable from 3.0V~6.0V in 0.1 volt increments
- Power bank Output: 5V 500mAh; 2600mAh
- Charging voltage: 5V; Use the USB cable for charging, no need to remove the battery
- Quiescent current: <100uA
- Charging indicator light
-
Battery: 1 PCS 2600mAh 18650 battery(or 2400mAh or 2200mAh), or 18500 1400mAh, or
18350 900mAh. - Charging Time: 3.5-5.5hours
- PBVMax can handle 5AMPS or even bigger current
-
Protection against short circuit. Protection against installing the battery backwards. The mod
monitor the battery voltage and automatically shuts off when the battery is discharged -
Due to the reduction of battery life and other damage, you can easily replace the battery to
continue using for savings in cost.
Variable Voltage: 3v-6v in 0.1V increments |
||
Menu Setting(Indication) |
Function |
Operation Instruction |
|
(Menu 1) |
(1). In standby mod, Press the button 3 times in a row until "1.Uu"(or"1.Pu") is showed on the display,
leave the button free for 2 seconds, in 0.1v(0.5w), it will rotate back to 3.0 and go up again when you reach 6.0v( or 15w). |
"2.Ud"--Voltage down & "2.Pd"-- Wattage down |
(Menu 2) |
(1). In standby mod, Press the button 4 times in a row until "2.Ud"( or"2.Pd") is showed on the display, leave the button free for 2 seconds,
|